blueintegral / Level
An open source cognitive radio node
☆39Updated 10 years ago
Alternatives and similar repositories for Level:
Users that are interested in Level are comparing it to the libraries listed below
- Etch-A-SDR Project☆50Updated 8 years ago
- Experimental cognitive radio base station using USRPs and Level☆21Updated 10 years ago
- A cross between a smartphone and a software radio with an open hardware & software license. Built to set the Internet FREE from its bond…☆112Updated 8 years ago
- ☆28Updated 10 years ago
- Controller electonics and firmware for SatNOGS rotator☆38Updated 6 years ago
- RF and Microwave Engineering Scikit☆9Updated 2 months ago
- Firmware for the Laureline GPS NTP Server☆41Updated 10 years ago
- Software defined radio using Teensy 3.1, Teensy Audio shield and Softrock☆89Updated 7 years ago
- COMMS Hardware for UPSat☆32Updated 6 years ago
- 300 MHz to 3800 MHz TCVR daughter card for the Parallella board☆18Updated 10 years ago
- GMSK modem on raspberry pi, pandaboard any other linux board☆38Updated 10 years ago
- Software to turn the RTL2832U into an SDR☆35Updated 9 years ago
- A fork of gr-osmosdr supporting the FreeSRP☆21Updated 7 years ago
- Faraday hardware design files☆40Updated 8 years ago
- Schematics, Gerbers, Bill of materials☆33Updated 9 years ago
- Small C++ library to interface with the FreeSRP☆56Updated 2 years ago
- Educational software for use with the LimeSDR platform☆66Updated 6 years ago
- An open source miniPCIe development board based on the Xilinx Spartan 6 LX150T☆142Updated 9 years ago
- ATmega32U4 breakout board in USB stick format☆25Updated 6 years ago
- A proof-of-concept for running the Codec2 audio codec on an Arduino-compatible Adafruit Feather nRF52 Bluefruit LE board☆31Updated 7 years ago
- An Arduino library for sending AX.25 packets over the HopeRF RFM22/23 radio modules☆56Updated 4 years ago
- Utilities for SDR☆13Updated 8 years ago
- PRUDAQ is an open source 40MSPS (megasamples per second) Data Acquisition board for the Beaglebone Black/Green☆122Updated 8 years ago
- GEN-2 RFID based bootloader for the wisp5☆13Updated 9 years ago
- 3D printer controller software for BeagleBone with BeBoPr Cape. For information about the BeBoPr++ follow this link: https://github.com/m…☆71Updated 9 years ago
- Driver and application software for the Cryptotronix Hashlet☆60Updated 8 years ago
- A low cost ISM radio to wifi gateway☆41Updated 5 years ago
- My scripts to automate SD wifi uploads☆27Updated 10 years ago
- SatNOGS Rotator project☆76Updated 6 years ago