Alternatives and similar repositories for SolderSCAD:

Users that are interested in SolderSCAD are comparing it to the libraries listed below

• dasaki / nanoReflowController
  Reflow Oven Controller. See below for more information.
  ☆79Updated 5 years ago
• baldengineer / Open-Vapors
  Open Source Reflow Oven Controller.
  ☆19Updated 3 years ago
• galacticstudios / Logic-Meter
  ☆43Updated 4 years ago
• wagiminator / ATtiny13-TinyProbe
  Simple Logic Probe
  ☆40Updated 2 years ago
• cpldcpu / TinyTouchButton
  A touch controlled light with 4xWS2812 RGB LEDs and ATtiny 10
  ☆34Updated 6 years ago
• MichMich / KiCad-SSD1306_OLED-0.91-128x32
  Kicad Library Files for an 0.91" 128x32 OLED Display
  ☆36Updated 7 years ago
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆27Updated 6 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• bobricius / mbot
  2D actuator
  ☆27Updated 5 years ago
• wagiminator / ATtiny85-TinyLoad
  Electronic Dummy Load
  ☆47Updated 2 years ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆49Updated 2 years ago
• trueserve / reflowOvenController
  Reflow Oven Controller. true_oven devel branch progress: vertical LCD, 60Hz mains, faster LCD, bug fixes, works with Arduino Nano / Mini …
  ☆14Updated 9 years ago
• free-pdk / easy-pdk-programmer-lite-hardware
  A version of the easy pdk programmer that can be fully assembled using the JLCPCB assembly service.
  ☆9Updated 4 years ago
• im-pro-at / ESP32_ReflowOvenController
  Reflow Oven Controller with EPS32 and Webapp
  ☆40Updated 5 years ago
• mcauser / VCC_GND_F407VE
  MicroPython board definition for the VCC GND STM32F407VET6 mini board
  ☆20Updated 3 years ago
• kodera2t / Magical_tweezersIV
  ☆24Updated 8 years ago
• benheck / SPI-Neopixel
  Circuit to convert 800kHz SPI bus mode 1 into WS2812 "Neopixel" pulse width data
  ☆36Updated 6 years ago
• openKolibri / klais-16
  Sixteen Segment Display in the Klais range.
  ☆55Updated 4 years ago
• wigman27 / Arduino-Programmable-Constant-Current-Power-Resistance-Load
  This is all of the code, datasheets and design files for my instructable
  ☆37Updated 8 years ago
• technoblogy / continuity-tester
  A simple continuity tester, based on an ATtiny85 and a piezo buzzer.
  ☆18Updated 7 years ago
• Thor-x86 / arduino_cli
  I/O Testing or PC program <=> Arduino communication
  ☆31Updated 3 years ago
• RoboticsBrno / RB0005-UniversalStepDown
  Universal step-down module
  ☆26Updated 4 years ago
• sleemanj / pcb-test-pattern
  A test pattern for checking your Homebrew PCB efforts.
  ☆23Updated 10 years ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago
• har-in-air / ESP32-LCD-I2S
  Espressif ESP32 driving a controller-less monochrome lcd with parallel I2S bus
  ☆64Updated 5 years ago
• BroadwellConsultingInc / SerialWombat
  UART and I2C based smart I/O expansion chips based on microcontrollers
  ☆14Updated 4 months ago
• ArduinoHannover / ZPB30A1_Firmware
  Open-Source firmware for the ZPB30A1 electronic load (WIP)
  ☆49Updated 6 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 4 years ago
• rocketscream / TinyReflowController
  An all-in-one Arduino compatible reflow controller powered by ATtiny1634R
  ☆123Updated 3 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆25Updated 6 years ago