Alternatives and similar repositories for HM-10-Firmware

Users that are interested in HM-10-Firmware are comparing it to the libraries listed below

• Ladvien / HM-10
  Assortment of PCBs designed around the HM-10 BLE Serial module
  ☆56Updated 8 years ago
• spapadim / XPT2046
  Arduino library for XPT2046 / ADS7843 touchscreen driver
  ☆80Updated 6 years ago
• GravCorp / DayOLED_SSD1306
  A library for the Arduino Due, for using SSD1306 OLED screens, with DMA for high speed.
  ☆40Updated 10 years ago
• RedBearLab / CCLoader
  Burn BLE Mini (CC2540) firmware using Blend Micro board.
  ☆248Updated 4 years ago
• wdim0 / esp8266_with_KeDei_lcd_module
  ESP8266 with 3.5" KeDei LCD module
  ☆43Updated 8 years ago
• mharizanov / TFT32
  ☆41Updated 6 years ago
• ayavilevich / arduino-ble-ident-n-set
  Arduino BLE module identification and setup sketch. Supports HM-10, CC41 and similar generic BLE modules.
  ☆60Updated 6 years ago
• wdim0 / esp8266_fast_lcd_driver_hspi
  Fast LCD driver written from scratch for ESP8266 for driving ILI9341 (240x320) or ILI9486 / ILI9488 (320x480) compatible LCD controllers …
  ☆48Updated 8 years ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 10 years ago
• me-no-dev / ESP31B
  Arduino Core for ESP31B ESP32
  ☆56Updated 5 years ago
• marcmerlin / IoTuz
  IoTuz driver for ESP32 based LCA 2017 IoTuz board, also can be used as a demo on an espressif WROVER
  ☆30Updated 7 years ago
• lhartmann / esp_rtos_reprap
  Stepper motor controller based on FreeRTOS for the ESP8266.
  ☆64Updated 9 years ago
• dgolda / UTFT
  Modified UTFT library working with ILI9327 8-bit for example 3.5" TFT LCD from mcufriend.com
  ☆52Updated 10 years ago
• LowPowerLab / DualOptiboot
  Custom Optiboot to add wireless programming capability to Moteino
  ☆73Updated 5 years ago
• greiman / ChibiOS-Arduino
  ChibiOS/RT 3.0.3 for Arduino AVR, Due, and Teensy 3.x
  ☆111Updated 6 years ago
• psychogenic / SerialUI
  A Serial User Interface for embedded devices, namely Arduinos.
  ☆50Updated 6 years ago
• septillion-git / QC2Control
  Set the voltage of a Quick Charge 2.0 source via the Arduino.
  ☆68Updated 8 years ago
• oroce / BLE-CC254x-1.4.0
  my version of BLE-CC254x-1.4.0, check the branches
  ☆32Updated 9 years ago
• mattairtech / SAMD-MSD-Bootloader
  USB MSD (Mass Storage Device) bootloader for Atmel SAMD chips
  ☆37Updated 8 years ago
• OLIMEX / ESP32-PRO
  ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG
  ☆51Updated last year
• bcmi-labs / Esp-Link
  Control Panel and connectors for Arduino Uno WiFi
  ☆43Updated 8 years ago
• pvvx / RtlDuino
  Arduino module RTL8195/8711/8710Ax
  ☆74Updated 8 years ago
• RedBearLab / Biscuit
  Biscuit firmware for TI CC2540 SoC
  ☆181Updated 10 years ago
• todbot / arduino-i2c-scanner
  Simple Arduino I2C scanner as described at http://todbot.com/blog/2009/11/29/i2cscanner-pde-arduino-as-i2c-bus-scanner/
  ☆76Updated 9 years ago
• mikaelpatel / Arduino-OWI
  One Wire Interface (OWI) library for Arduino
  ☆62Updated 8 years ago
• nekromant / rf24boot
  nRF24L01+ bootloader for avr and other mcus
  ☆108Updated last year
• cnlohr / MinEspSDKLib
  Minimalist SDK on ESP8266ex
  ☆94Updated 7 years ago
• stanleyhuangyc / MultiLCD
  Arduino LCD library supporting multiple types of LCD shields and modules
  ☆119Updated 8 years ago
• Megunolink / MLP
  Arduino library for sending data to MegunoLink visualisers and useful components
  ☆47Updated last year
• olikraus / Ucglib_Arduino
  Arduino library for Ucglib (new library format)
  ☆60Updated 2 years ago