Alternatives and similar repositories for solar-logger

Users that are interested in solar-logger are comparing it to the libraries listed below

• nmakel / solaredge_modbus
  SolarEdge Modbus data collection library
  ☆157Updated 4 months ago
• nmakel / solaredge_meterproxy
  Modbus proxy for SolarEdge inverters and unsupported kWh meters
  ☆34Updated last year
• jesusrop / esphome_huawei_sun2000
  Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU
  ☆51Updated 2 years ago
• syssi / esphome-solax-x1-mini
  ESPHome component to monitor a Solax X1 mini via RS485
  ☆39Updated last week
• CJNE / ha-sunspec
  Home Assistant customcomponent for SunSpec modbus devices
  ☆68Updated last month
• Akulatraxas / ha-modbusproxy
  Hassio Addon packaging modus-proxy
  ☆53Updated last year
• wichers / lovelace-comfoair
  Homeassistant Lovelace Comfoair card
  ☆23Updated 10 months ago
• nygma2004 / growatt2mqtt
  Growatt Solar Inverter Modbus Data to MQTT Gateway
  ☆161Updated 2 years ago
• KinDR007 / VictronSmartShunt-ESPHOME
  SmartShunt ve.direct to ESPHOME node
  ☆71Updated last year
• tiagocoutinho / modbus-proxy
  Connect multiple clients to modbus devices
  ☆91Updated 3 months ago
• tobiasfaust / SolaxModbusGateway
  Modbus RTU to MQTT Gateway
  ☆88Updated last month
• stephan192 / hoermann_door
  Control Hörmann doors directly via MQTT
  ☆117Updated 5 months ago
• klatremis / esphome-for-deye
  Esphome component for Deye 3 phase inverters for Home Assistant
  ☆169Updated 5 months ago
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆80Updated 2 years ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆147Updated 2 years ago
• hkiam / HCPBridge
  emulates Hoermann HAP 1 HCP (HCP2) on ESP8622, ESP32 and Arduino.
  ☆96Updated 4 years ago
• RalfZim / venus.dbus-fronius-smartmeter
  A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.
  ☆56Updated 10 months ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆96Updated last week
• jantenhove / GoodWeLogger
  ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics
  ☆96Updated last year
• pablozg / freeds
  Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
  ☆106Updated 2 months ago
• bagges / deye-esp32-bridge
  ☆50Updated 2 months ago
• InventoCasa / ha-advanced-blueprints
  Advanced Blueprints combined with pyscript for extra useful automations
  ☆193Updated 9 months ago
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆44Updated last year
• cmcgerty / Sofar2mqtt
  A smart home interface for Sofar solar and battery inverters.
  ☆81Updated last year
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆56Updated 3 weeks ago
• ZeroErrors / solarmon
  A simple Python Script for reading Growatt PV Inverter Modbus RS485 RTU Protocol and storing into InfluxDB
  ☆46Updated last year
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆124Updated this week
• tomatensaus / DeyeSolarDesktop
  Home Assistant bootstrap for monitoring solar for Deye/Sunsynk/Sol-Ark
  ☆68Updated last week
• hidaba / PylontechMonitoring
  Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.
  ☆23Updated last week
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆55Updated 2 weeks ago