bartwo / esp32_p1meterLinks
DSMR5.0 P1 meter ("slimme meter") to mqtt using esp8266. Sends information about consumed energy, delivered energy (solar panels) and gas.
☆59Updated last year
Alternatives and similar repositories for esp32_p1meter
Users that are interested in esp32_p1meter are comparing it to the libraries listed below
Sorting:
- DSMR5 P1 meter to mqtt using esp8266☆170Updated 11 months ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆109Updated 3 years ago
- Software for the ESP8266 that sends P1 smart meter data to Domoticz (with CRC checking)☆82Updated 6 years ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆87Updated this week
- A smartmeter project, made for ESPHome (hardware + ESPHome config)☆80Updated 9 months ago
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆155Updated last year
- Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)☆116Updated 4 years ago
- Custom EspHome sensor for reading P1 port on dutch smart meters with ESP module for Home Assistant☆63Updated 2 years ago
- ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter☆105Updated last year
- ESPHome Modbus Server component☆45Updated last year
- ☆33Updated 2 years ago
- ESP32 based ethernet I/O board for home automation☆65Updated 2 years ago
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated this week
- P1 serial forwarder for use in HomeAssistent☆23Updated 5 months ago
- Software for the ESP8266 that sends P1 smart meter data to MQTT (without CRC checking)☆22Updated 7 years ago
- This is my NSPanel config, used in collaboration with ESPHome and Home Assistant☆58Updated 3 years ago
- Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU☆51Updated 3 years ago
- ESPHome component to read out DLMS smart meters via M-Bus☆112Updated last year
- ☆121Updated 2 years ago
- Control Hörmann doors directly via MQTT☆118Updated 5 months ago
- A ESP32 sensor to read an p1 electricity meter and publish this to MQTT and HomeAssistant, written in MicroPython☆27Updated 11 months ago
- Tasmota unofficial firmware builds. Install via Tasmota WebInstaller☆106Updated last week
- ☆34Updated last month
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆68Updated 5 years ago
- Guide to convert arduino code to ESPHome component with inputs controlled by Home Assistant.☆48Updated 3 years ago
- A library that provides tools to simplify MQTT discovery implementation for Home Assistant to your device.☆47Updated 9 months ago
- Nextion display with ESP8266 microcontroller (Wemos D1 mini) showing Home Assistant temperature sensors and weather forecast☆180Updated 3 years ago
- dsmr 4.2 P1 meter to mqtt using esp8266 nodemcu☆68Updated 4 years ago
- Bluetooth Low Energy (BLE) controller for ESPHome☆123Updated last year
- my custom components for esphome☆19Updated last year