barbeque / sg1000Links
A homebrew Sega SG-1000, with an eye towards SC-3000 compatibility
☆26Updated 5 months ago
Alternatives and similar repositories for sg1000
Users that are interested in sg1000 are comparing it to the libraries listed below
Sorting:
- An RGB adapter for TMS9928A and TMS9929A☆58Updated 5 years ago
- Adapt a floppy cable meant to use an edge connector to use a 34-pin female pin connector instead.☆16Updated 5 months ago
- Firmware for PlusCart and UnoCart☆31Updated 2 months ago
- Sega flash multicart for SC-3000, SG-1000 and Mark III based on Pico Clone☆27Updated 9 months ago
- PCMCIA OPL3 Sound Card☆27Updated last week
- Attempt to reverse-engineer a Proton PT8010AF based Turbo XT motherboard☆20Updated 3 years ago
- Firmware for Robin Edwards' UnoCart☆57Updated last year
- A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also…☆43Updated last year
- Code for Fujitsu FM-7 and FM TOWNS series computers☆24Updated last month
- Internal ISA OPL3 for PCXT and compatibles.☆21Updated 4 years ago
- NES cartridge with no mapper support☆23Updated 8 years ago
- Amstrad CPC 6128 for MiSTer☆26Updated 3 weeks ago
- A Texas Instruments TI99/4a Emulator for the DS/DSi. Parsec, Alpiner, Tunnels of Doom and Hunt the Wumpus - all the classic TI games the…☆33Updated 5 months ago
- Component video (YPbPr) output for the ZX Spectrum computer☆36Updated last year
- Commodore VIC-20 for MiSTer☆18Updated last year
- A YM2413 clone module written in VHDL.☆25Updated 4 years ago
- ☆10Updated 2 years ago
- Update of the Omega Home Computer Project☆34Updated 5 months ago
- Colecovision flash multicart based on Pico clone☆41Updated 9 months ago
- Open Source Hardware for Vintage Computers☆27Updated 10 months ago
- ☆20Updated 5 years ago
- 240p Test Suite for Colecovision/MSX/SG1000☆18Updated last year
- Adapter so that Sega Mega Drive (Sega Genesis in North America) gamepads can safely be used with the MSX line of computers.☆12Updated 2 years ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆54Updated 11 months ago
- Minimig for the MiST board☆18Updated 2 months ago
- RGB to SVideo converter for Amiga computers☆11Updated last year
- 4Mb expansion for OMEGA MSX2+ HOME COMPUTER☆16Updated 3 years ago
- A voltage adapter PCB for 486 CPUs☆42Updated 2 years ago
- Atari ST/STe core for FPGAs☆43Updated 3 months ago
- F4 register and FMPAC combo board for MSX☆18Updated 2 months ago