aviborg / MonitorKNXRFLinks
This code monitors (or sniff) the radiosignals sent by Uponor KNX RF thermostats and sent to OpenHAB using the REST interface. A CC1101 chip is connected by SPI to the Raspberry PI which streams the KNX RF data to OpenHAB items.
☆11Updated 3 years ago
Alternatives and similar repositories for MonitorKNXRF
Users that are interested in MonitorKNXRF are comparing it to the libraries listed below
Sorting:
- Record and replay RF433Mhz signals on an ESP8266, using the Arduino IDE.☆25Updated last year
- ESP32 driver library for TI CC1100 Low-Power Sub-1 GHz RF Transceiver☆81Updated 7 years ago
- ☆19Updated 10 months ago
- SIGNALduino direclty on ESP8266☆15Updated 6 years ago
- La Crosse RX23 wind speed and direction sensor library☆13Updated 2 years ago
- With this tool, you can register entries of the CC1101 during operation read and change. You can switch to send or receive. Set the trans…☆48Updated 4 years ago
- Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably…☆53Updated last year
- Simple Captive Portal for Evil Crow Keylogger: Access point (Free WiFi) with a registration form. Information is stored on the MicroSD ca…☆13Updated 5 years ago
- CC1101 Low-Power Sub-1 GHz RF Transceiver driver for esp-idf☆80Updated 2 months ago
- ESP32-based Bluetooth Low Energy (BLE) scanner to report presence of bluetooth devices into an MQTT service.☆130Updated last year
- CC1101 Library for ESP32/ESP8266☆17Updated 5 years ago
- Arduino support for SAM D|L|C (M0+ and M4F). It adds support for new devices like the D51, SAMR34, L21, C21, and D11. It also adds new cl…☆10Updated last year
- Sending and receiving Simu: Radio motor Hz / Hz02 / EHz / Door control RSA / Radio receiver SA Hz / Garage door operator GM800 / GM1000 M…☆51Updated 4 years ago
- Arduino lib to operate 433/315Mhz devices like power outlet sockets and receive PIR, door, window sensor signals☆30Updated 4 years ago
- A clone of the ELECHOUSE_CC1101 http://www.elechouse.com library updated for Arduino 1.0 plus.☆97Updated 6 years ago
- Arduino library for I2C access to the PN7150 RFID/Near Field Communication chip☆47Updated this week
- Beacon monitor for ESP32 with OLED display☆24Updated 6 years ago
- ☆13Updated 2 years ago
- 433mhz rf sniffer and receiver☆121Updated 4 years ago
- Hardware hacking project, analyzing signal from remote control.☆16Updated 2 years ago
- Front End for ESPEasy >>>>>>>NOT YET READY FOR PRODUCTION<<<<<<<<☆11Updated 5 years ago
- System to capture digital signaldata and transfer them to another system☆90Updated last week
- Atmega328 Bootloader for wireless (OTA) code updates, using the CC1101 RF chip.☆18Updated 2 years ago
- Arduino library for interfacing with CC1101 transceivers.☆194Updated 5 years ago
- ☆45Updated 5 years ago
- This is simple half duplex radio communication device built with CC1101 module and Arduino Pro Micro (3.3V / 8MHz) using SmartRC library☆21Updated 3 years ago
- Relay Attack☆13Updated 5 years ago
- Cross-Platform SDR Software☆14Updated 7 months ago
- an alternative dashboard site in tile optic for espeasy☆20Updated last month
- Receive/Transmit/Save Evil Crow RF log files 📡☆15Updated 2 years ago