andresoliva / LoRa-E5
Advanced application of SeedStudio module Grove-Wio-E5 based on chip STM32WLE5JC from STM connected to an Arduino Nano 33 BLE Sense board. Works with any Arduino that supports UART
☆20Updated last year
Alternatives and similar repositories for LoRa-E5:
Users that are interested in LoRa-E5 are comparing it to the libraries listed below
- Arduino library for working with the Seeed Studio Wio-E5 Wireless Module.☆11Updated 2 years ago
- Arduino LoRa EBYTE E22 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards).. sx1…☆121Updated 2 years ago
- Ardunio LoRa E5 driver for WIO and other Boards☆25Updated last year
- BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino☆80Updated 4 years ago
- Reference implementation of a Hardware Abstraction Layer and a Packet Forwarder for a LoRaWAN One Channel Hub. This is an ESP-IDF project…☆27Updated last month
- STM32WL LoRaWAN Breakout board for RAK3172☆31Updated last year
- Development for LoRa☆19Updated 4 years ago
- Arduino library for basic transmitting and receiving data using LoRa and FSK modulation☆68Updated last year
- ESP32+RFM95 = Single-channel LoRa WiFI Gateway (or device!)☆30Updated 2 years ago
- Examples for Canopus_RAK3172 board☆61Updated 5 months ago
- Port of STM32WLxx example for RAK3172☆32Updated last year
- RFM9x Breakout Board☆25Updated last year
- Open source files for RAK2270 Sticker Tracker☆26Updated 9 months ago
- Arduino & ESP-IDF libraries written for AXP19x, 20x☆93Updated 2 years ago
- ☆19Updated last month
- RUI3 BSP for RAK3172 modules☆26Updated 2 weeks ago
- This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.☆38Updated 3 years ago
- LoRa WAN Single Channel Gateway☆45Updated last year
- An Arduino Library for LoRa Communication using SX1262/1268☆46Updated 2 months ago
- repo for the Bee Data Logger☆63Updated 2 months ago
- Applications on LoRa-E5 mini/ LoRa-E5 Development Kit with v1.1.0 STM32Cube MCU Package for STM32WL series(SDK)☆68Updated 3 months ago
- ☆15Updated last month
- RAKwireless BSP Support for the Arduino Board Manager☆24Updated last week
- STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip☆17Updated last month
- SIM7080 Dev Board hardware design files☆12Updated 3 years ago
- Advanced Robot with camera and web control, for 4WD, 2WD or Tank☆13Updated 6 years ago
- Example how to configure LORa/LoRaWAN of a WisBlock Core RAK4631 over BLE☆17Updated 4 years ago
- Example code and description how to use ESP32 low noise amplifier (LNA), including Arduino library and ESP-IDF component☆53Updated 5 years ago
- ☆12Updated 5 years ago
- Some simple code for testing esp now range☆26Updated 3 years ago