Alternatives and similar repositories for m1k-cad:

Users that are interested in m1k-cad are comparing it to the libraries listed below

• analogdevicesinc / m1k-fw
  Firmware for the ADALM1000.
  ☆19Updated last year
• tdjastrzebski / ICN6211-Configurator
  ICN6211 Configurator
  ☆36Updated 4 years ago
• issus / DifferentialProbe
  Open Source 250MHz Differential Oscilloscope Probe
  ☆61Updated 2 years ago
• aroerina / DoroidOscillo-Board
  DoroidOscillo's KiCAD pcb data
  ☆23Updated 7 years ago
• kaidegit / CMSIS-DAPbyWCH
  a cheap CMSIS-DAP debugger by an WCH chip named CH549F
  ☆45Updated 3 years ago
• probe-scope / Probe-Scope-PCB
  Main Probe Scope PCB Repo
  ☆56Updated 5 years ago
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 7 years ago
• dc-power-supply / dc-power-supply
  OSHW DC power supply
  ☆26Updated 3 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated last year
• andysworkshop / nanocounter
  An FPGA/STM32 based frequency counter with an Android user interface
  ☆28Updated 8 years ago
• sigrokproject / sigrok-firmware-fx2lafw
  Read-only mirror of the official repo at git://sigrok.org/sigrok-firmware-fx2lafw. Pull requests welcome. Please file bugreports at sigro…
  ☆44Updated 11 months ago
• blueskull / CH552-JTAG
  USB-JTAG Adapter Using CH552
  ☆67Updated 3 years ago
• Aylo6061 / PDHV
  ☆32Updated last year
• prosper00 / CH32V305-DAPLink-HS
  CH32V305 DAPLink - USB2.0 High Speed DAPLink firmware for the WCH-LinkE
  ☆13Updated 5 months ago
• Galvant / gpibusb-firmware-arm
  GPIB to USB adapter firmware for a Cortex M0 ARM microcontroller
  ☆33Updated 10 years ago
• ak-hard / usb-blaster-stm32
  Software JTAG probe running on stm32f103.
  ☆24Updated 4 years ago
• MegabytePhreak / scope-footswitch
  Oscilloscope to footswitch interface for run control using USBTMC
  ☆19Updated 4 years ago
• dword1511 / stm32-freqmeter
  A frequency / Hertz meter based on STM32F103 MCUs.
  ☆48Updated 6 years ago
• matthiasbock / Altium-Libraries
  Symbols, footprints and 3d models for use with Altium Designer
  ☆47Updated 11 months ago
• martinribelotta / h730duino
  STM32H7 Arduino form factor and software compatible board
  ☆28Updated 3 years ago
• vsergeev / arm-bmw-sw
  ARM Bare Metal Widget (arm-bmw) software
  ☆19Updated 7 years ago
• ataradov / vcp
  A collection of Virtual COM-Port implementations
  ☆24Updated 2 years ago
• perehinik / Logic_Analyzer_PCB
  KiCad PCB project of Logic Analyzer
  ☆36Updated 4 years ago
• openscopeproject / HP34401a-OLED-HW
  HP34401a DMM OLED display mod hardware
  ☆25Updated 5 years ago
• tannewt / tinylogicfriend
  TinyUSB-based logic analyzer code for Sigrok
  ☆27Updated 3 years ago
• Galvant / gpibusb-pcb
  PCB KiCAD project files
  ☆78Updated 10 years ago
• alpelectronics / SmartPower
  USB-C 1-60V Current and Voltage Controlled Power Supply
  ☆18Updated 3 years ago
• x893 / rlc-meter-balmer
  RLC Meter with STM32F303 microcontroller
  ☆17Updated 9 years ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 2 months ago
• MR-DOS / Si5351-lib
  Si5351 lib for STM32
  ☆55Updated 3 years ago