Alternatives and similar repositories for DALY-docs-soft-firm

Users that are interested in DALY-docs-soft-firm are comparing it to the libraries listed below

• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆177Updated 4 months ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆117Updated last year
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆98Updated 9 months ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated 2 years ago
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆70Updated 7 months ago
• chickey / RS485-WiFi-EPEver
  This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…
  ☆74Updated last year
• leodesigner / powmr_comm
  PowMr Inverter serial communication protocol reverse engineering
  ☆88Updated 2 years ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆198Updated last month
• NEEY-electronic / JK
  ☆66Updated 3 years ago
• syssi / esphome-atorch-dl24
  ESPHome component to monitor and control some Atorch meters via bluetooth
  ☆87Updated last month
• rakhmaevao / JbdBms
  Library for working with JBD BMS
  ☆76Updated last year
• tomvanklinken / Flatpack2
  ☆12Updated 4 years ago
• atc1441 / NETSGPClient
  Arduino Interface for cheap 2.4ghz RF enabled Solar Micro Inverters
  ☆66Updated 2 years ago
• FurTrader / Overkill-Solar-BMS_2-Arduino-Library
  Read and Write Library for Overkill Solar BMSs
  ☆19Updated 3 years ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆95Updated last month
• bres55 / Smart-BMS-arduino-Reader
  ☆63Updated 6 years ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆77Updated last year
• straga / Smart-Meter-Gateway
  Gateway for Solax Invertor - it can use any Modbus Meter.
  ☆14Updated 3 months ago
• wildekek / rdtech-esphome
  Add Home Assistant support to your RDTech power supply
  ☆50Updated 9 months ago
• apreb / eNode
  Device to measure energy and temperature
  ☆81Updated 6 years ago
• jblance / jkbms
  repo with attempts to test connectivity to JK-BMS via BLE
  ☆30Updated 3 years ago
• sharandac / powermeter
  A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors
  ☆46Updated 2 years ago
• PurpleAlien / jk-bms_grafana
  Read data from a JK BMS and graph it in Grafana
  ☆59Updated 11 months ago
• Sleeper85 / esphome-jk-bms-can
  ☆104Updated last year
• jakkik / DieselHeaterRF
  Simple library for Arduino (ESP32) to control a Chinese diesel heater through 433 MHz RF
  ☆105Updated 5 years ago
• ptvoinfo / zigbee-configurable-firmware
  PTVO firmware for CC2530, CC2531, and CC2652 Zigbee chips
  ☆253Updated 2 months ago
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆70Updated last month
• smartboxchannel / SONOFF-SNZB-02-Temperature-and-humidity-sensor
  An alternative firmware version for the SONOFF SNZB-02 temperature and humidity sensor. Adjustable sleep interval via zigbee network, the…
  ☆101Updated this week
• setfirelabs / Pylontech_emoncms
  ☆11Updated 4 years ago
• glitterkitty / EpEverSolarMonitor
  Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT
  ☆32Updated 7 years ago