afch / NixieClockLinks
Firmware (Sketch) GRA & AFCH Nixie Clock MCU Boards NCM109 (NCM105 and NCM107 Discontinued Products) and Tubes Boards NCT2XX, NCT3XX, NCT4XX, NCT8XX
☆50Updated 3 months ago
Alternatives and similar repositories for NixieClock
Users that are interested in NixieClock are comparing it to the libraries listed below
Sorting:
- ☆114Updated 4 years ago
- Alternative Ice Tube Clock firmware and hardware revision☆42Updated 2 years ago
- Source code for my Best Improvement board v1.5 (RP2040) to control Best BST-863 hot air station☆18Updated 2 years ago
- 8x16 game based on STC15F2K60S2 an 8051 clone☆14Updated 4 years ago
- Battery Tester for 1.5V batteries using an Attiny85 and a small OLED display☆22Updated 8 years ago
- A specifically made script for generating fully customizable knobs for making toolless hex screws☆54Updated 2 years ago
- Circuit to convert 800kHz SPI bus mode 1 into WS2812 "Neopixel" pulse width data☆36Updated 6 years ago
- Arduino compatible reflow oven controller☆134Updated 12 years ago
- Nixie Clock based on Arduino☆41Updated 6 years ago
- AVR High Voltage Programmer 2☆27Updated 5 years ago
- A retro watch☆49Updated 5 years ago
- An all-in-one Arduino compatible reflow controller powered by ATtiny1634R☆124Updated 3 years ago
- A sketch for the Arduino Mega that allows it to read and write to some older generation SRAM chips☆10Updated 7 years ago
- Atmega32u4 Breakout Board☆90Updated 5 years ago
- The source code for my reflow oven, WARNING use at your own risk. This project deals with MAINS VOLTAGES which can kill.☆23Updated 4 years ago
- Arduino library for 256x64 OLED ER-OLED032-1 (SSD1322 driver)☆29Updated 3 years ago
- Chainable 5*7 Microdot Displays for Arduino!☆59Updated 3 years ago
- ☆48Updated 7 years ago
- Open Source Reflow Oven Controller.☆19Updated 3 years ago
- Improved FW for the DL4YHF frequency counter (higher frequency resolution down to 0.001 Hz due to period measuring mode; extended frequen…☆14Updated last year
- 32 band audio visualizer using an ATTiny85 and an SSD1306 OLED display. Built in Arduino.☆53Updated 4 years ago
- An Arduino powered 16x16 LED Matrix using the FastLED library to drive a WS2812B LED array.☆21Updated 3 years ago
- AVR-based i2c-slave Neopixel driver☆31Updated 7 years ago
- ☆25Updated 5 years ago
- ☆30Updated 9 years ago
- Clock with four 8x8 Led-Matrix, both for ESP8266 and ESP32☆25Updated last year
- Universal step-down module☆26Updated 4 years ago
- Clock that uses TinyGPS to crack GPS strings and displays the time/date on 6 statically driven VFD tubes via 3 MAX6921s☆12Updated 5 years ago
- ☆31Updated last year
- DIY UPDI programmer with open source hardware!☆74Updated 6 months ago