adlerre / obd2-mqtt

Related projects ⓘ

Alternatives and complementary repositories for obd2-mqtt

• krizkontrolz / Home-Assistant-nextion_handler
  An approach for integrating Nextion devices into Home Assistant, using a Python service that allows Nextion Events to send instructions t…
  ☆50Updated 2 years ago
• jay-oswald / ha-wican
  ☆25Updated last week
• tejasitraj / esphome-color-display
  My implementation of a 3.2" TFT Colour Display with an ESP32 in ESPHome
  ☆23Updated 2 years ago
• TyzzyT / Sonoff-NSPanel-with-ESPHome
  This is my NSPanel config, used in collaboration with ESPHome and Home Assistant
  ☆55Updated 2 years ago
• syssi / esphome-solax-x1-mini
  ESPHome component to monitor a Solax X1 mini via RS485
  ☆39Updated 3 months ago
• schmurtzm / RFLink32-For-Sonoff-RF-Bridge
  RFLink32 For Sonoff RF Bridge
  ☆76Updated 2 years ago
• yaourdt / tasmota-to-mgos
  A minimal firmware for OTA (over the air) flashing Mongoose OS from Tasmota, Tuya stock, or compatible firmware types.
  ☆64Updated last year
• hidaba / PylontechMonitoring
  Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.
  ☆17Updated 7 months ago
• koenvervloesem / M5Stack-Air-Quality-ESPHome
  ESPHome configuration for M5Stack's PM2.5 Air Quality Kit with the PMSA003 particulate matter sensor and the SHT20 temperature and humidi…
  ☆50Updated last year
• martgras / esphome
  ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Autom…
  ☆28Updated last month
• KrystianD / bm2-battery-monitor
  Python connector and ESPHome template for Bluetooth based Battery Monitors - reverse engineering.
  ☆68Updated last month
• afarago / esphome_component_bthome
  This package implements ESPHome components to low-code support Bluetooth Low Eneregy BTHome device standalone reception, and a leverage t…
  ☆56Updated 6 months ago
• cablesandcoffee / NSPanel
  ☆62Updated last year
• DeanoXX / esphome-config
  Key elements of ESPHome YAML Configs
  ☆32Updated 2 years ago
• Giuseppe-P / Thermostat_Esphome-Home-Assistant_Nextion-3.2-inches_ON-OFF-MANUAL
  Home Assistant - Thermostat Touch Nextion - Firmware ESPHOME
  ☆22Updated last year
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆40Updated last year
• danielkucera / ebus-adapter
  ☆33Updated last month
• epiclabs-uc / esphome-modbus-server
  ESPHome Modbus Server component
  ☆41Updated last year
• keshavdv / victron-hacs
  Home Assistant plug-in for Victron Instant Readout compatible devices
  ☆63Updated last month
• codm / cc2652p2-tcp-zigbee
  ZigBee CC2652P2 Ethernet Coordinator
  ☆34Updated last year
• tolnai / esphome-dashboard-lilygo-t5
  ☆48Updated 3 weeks ago
• softwarecrash / Victron2MQTT
  Little Program for ESP82XX to get the Victron data to web and MQTT
  ☆50Updated 3 weeks ago
• kippesikgithub / esp_motion_mmwave
  LD2410 mmwave Motion detection in ESPHome for Home Assistant . Can be combined with temperature, humidity and lux sensor
  ☆43Updated last year
• Fabian-Schmidt / esphome-victron_ble
  Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
  ☆187Updated this week
• wichers / lovelace-comfoair
  Homeassistant Lovelace Comfoair card
  ☆18Updated 4 months ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆68Updated last month
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆80Updated last month
• ferelarg / Seplos3MQTT
  Python script to connect a battery pack using BMS Seplos v3.0 to MQTT
  ☆13Updated 7 months ago
• rospogrigio / airbnk_mqtt
  MQTT control of Airbnk locks.
  ☆29Updated last year
• nldroid / CustomP1UartComponent
  Custom EspHome sensor for reading P1 port on dutch smart meters with ESP module for Home Assistant
  ☆63Updated 2 years ago