adafruit / Adafruit_Python_Extended_BusLinks
Helper Library for Blinka to allow creating I2C and SPI busio objects by passing in the Bus ID
☆33Updated 2 years ago
Alternatives and similar repositories for Adafruit_Python_Extended_Bus
Users that are interested in Adafruit_Python_Extended_Bus are comparing it to the libraries listed below
Sorting:
- GPS parsing module for CircuitPython. Meant to parse NMEA data from serial GPS modules.☆79Updated last week
- Two helper classes that handle transaction related state for I2C and SPI including locks.☆113Updated last week
- ☆24Updated last year
- Display the behaviour of a realtime program with a scope or logic analyser.☆37Updated 7 months ago
- Repository for Sensirion humidity and temperature sensor support on Arduino☆70Updated 7 months ago
- A port of FreeRTOS that runs on Arduino Samd21 boards☆63Updated 3 years ago
- Micropython Library for Lidar Sensor VL53L0X☆43Updated 3 years ago
- Native Ethernet library for Teensy 4.1☆65Updated last year
- Super-slim image decoder that loads code as needed to minimize memory use☆16Updated last week
- CircuitPython driver for BNO055 absolute orientation sensor☆91Updated last week
- Arduino Library for Adafruit LIS3DH breakout board☆75Updated 11 months ago
- Micropython module for the BMP085 and BMP180 sensors☆23Updated last month
- Adafruit CircuitPython drivers for the DS3231 realtime clock.☆20Updated last week
- MicroPython sensor, actuator and display libraries☆60Updated 5 years ago
- Python library for the PWM3901 optical flow-rate sensor☆37Updated last year
- CircuitPython driver for the TCA9548A I2C Multiplexer.☆27Updated last week
- CircuitPython framebuf module, based on the Python framebuf module☆39Updated last week
- http://www.adafruit.com/products/746☆26Updated 3 years ago
- Python library for the as7262 spectral sensor breakout☆18Updated last year
- Bluetooth Low Energy (BLE) library for CircuitPython☆134Updated last week
- circuit python driver for INA219 current sensor☆25Updated last week
- Helper library for the Hillcrest Laboratories BNO080 IMU☆32Updated last week
- Python app to drive stepper motors from a raspberry pi with good performance and minimal extra hardware. A simple built in web interface …☆25Updated 4 years ago
- Python wrapper class for HMC5883L magnetometer (using smbus I2c)☆28Updated 5 years ago
- Helpers for controlling PWM based motors and servos☆65Updated last week
- Arduino library to support the LSM6DSOX 3D accelerometer and 3D gyroscope☆31Updated last year
- ☆59Updated last week
- ☆36Updated last month
- Library for reading and controlling MT3333 and MT3339 based GPS modules over I2C.☆18Updated last year
- Support for building ultra low power systems based on the Pyboard (1.x and D series).☆45Updated last year