Alternatives and similar repositories for Adafruit-TFP401-HDMI-To-40Pin-TFT-PCB

Users that are interested in Adafruit-TFP401-HDMI-To-40Pin-TFT-PCB are comparing it to the libraries listed below

• watterott / HDMI-Adapter
  Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...
  ☆72Updated 5 years ago
• Aus3D / PicoPrint
  An STM32F4-based 3D printer control board, designed to be fast, quiet, and compact.
  ☆22Updated 6 years ago
• tdjastrzebski / ICN6211-Configurator
  ICN6211 Configurator
  ☆39Updated 4 years ago
• ketszim97 / USB_PD_Sink
  USB Sink based around the STUSB4500
  ☆27Updated 4 years ago
• xboxhacker / OpenFeeder
  OpenSource feeder for DIY and OpenPNP community
  ☆32Updated 9 years ago
• tom-biskupic / LabPSU
  Open Source Lab Power Supply
  ☆28Updated 3 years ago
• SoCXin / PY32F002
  L1 R1 S1: PuyaSemi 24MHz Cortex-M0 MCU (PY32F002A/PY32F003/PY32F030)
  ☆25Updated 2 years ago
• specadmin / RTD2660AVR
  RTD2660 LCD controller driver for AVR
  ☆52Updated 3 years ago
• YuzukiHD / YuzukiRosetta
  Yuzuki Rosetta is a low-cost Linux development board based on the R328-S3. Dual-core A7, 128MB RAM, NAND Flash, WI-FI&BT. Raspberry Pi Ze…
  ☆28Updated 2 years ago
• HonghongLu / CH554
  8051 microcontroller
  ☆40Updated 7 years ago
• probe-scope / Probe-Scope-PCB
  Main Probe Scope PCB Repo
  ☆57Updated 5 years ago
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆19Updated 7 years ago
• richard-sim / openpnp-linear-rails
  An OpenPnP compatible SMT pick and place machine with linear rails based on Anthony Webb's build on hackaday.io.
  ☆13Updated 9 years ago
• Smoothieware / Smoothieboard2
  Hardware files for the Smoothieboard v2, and extension boards
  ☆58Updated last year
• Kurokesu / SCE2-GRBL
  Kurokesu motion controller SCE2-M module GRBL based firmware
  ☆17Updated 5 months ago
• AlexKlimaj / BQ25703A_Module
  Buck boost regulator module that supports 3.5V-24V input, charging 1-4 cell batteries, and programmable USB OTG output from 4.48V to 20.8…
  ☆17Updated 4 years ago
• adafruit / Adafruit-FT232H-Breakout-PCB
  PCB files for the Adafruit FT232H Breakout
  ☆37Updated 5 years ago
• hasenbanck / remram
  32bit STM32F7 based 3D printing controller using TMC2130 stepper driver
  ☆40Updated 5 years ago
• xjtuecho / BluePill
  An improved dev-board for LQFP-48 Cortex-M and RISC-V MCUs.
  ☆21Updated last year
• adafruit / Adafruit-IS31FL3731-CharliePlex-LED-Breakout-PCB
  PCB files for the IS31FL3731 CharliePlex LED Breakouts
  ☆9Updated 2 years ago
• bobricius / 2.5D-stepper-motor
  It is compatible with standard stepper motor diver, cnc or GRBL shield, direct replacement of X-Y stepper motors.
  ☆27Updated 6 years ago
• rogerclarkmelbourne / STM32_Pill_Boards
  Various STM32 boards in a form factor similar to the Maple Mini or Blue Pill board
  ☆49Updated 6 years ago
• IRNAS / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆37Updated 9 years ago
• Muny / DIY-JBC-T245-Station
  A DIY JBC T245 soldering iron station.
  ☆42Updated 6 years ago
• ktand / Armed
  Armed 3D Printer Controller
  ☆17Updated 3 years ago
• adafruit / Adafruit-RA8875-Breakout-Board-PCB
  PCB files for Adafruit RA8875 TFT Driver Breakout
  ☆11Updated last year
• floppes / RTD266xFlash
  ☆77Updated last year
• MegabytePhreak / scope-footswitch
  Oscilloscope to footswitch interface for run control using USBTMC
  ☆19Updated 4 years ago
• wagiminator / ATtiny13-TinyProbe
  Simple Logic Probe
  ☆42Updated 2 years ago
• wagiminator / ATtiny85-USB-C-Tester
  Simple USB-C Power Delivery Tester
  ☆38Updated 2 years ago