Alternatives and similar repositories for victronvenussupport:

Users that are interested in victronvenussupport are comparing it to the libraries listed below

• kwindrem / RpiDisplaySetup
  Raspberry Pi 7" touchscreen for Venus OS (also HDMI)
  ☆42Updated last week
• kwindrem / VeCanSetup
  Manages Victrion VenusOs VeCan (aka CANbus) ports
  ☆50Updated 4 months ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆81Updated last week
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆42Updated last year
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆100Updated 5 months ago
• KlausLi / Esp-Seplos-Controller
  Seplos Controller mit Webseite Der Esp8266 ist über ein Rs485 Modul mit dem Seplos BMS verbunden und kann diesem seine Daten entlocken. S…
  ☆26Updated 2 years ago
• glitterkitty / EpEverSolarMonitor
  Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT
  ☆33Updated 6 years ago
• jkairys / growatt-esp8266
  Growatt Inverter monitoring via MQTT using ESP8266 modbus interface
  ☆66Updated 4 years ago
• kwindrem / RpiGpioSetup
  VenusOs: 5 digital inputs, all pull-ups
  ☆27Updated 6 months ago
• mr-manuel / venus-os_dbus-mqtt-battery
  This Venus OS driver gets the data from MQTT and displays it as battery.
  ☆51Updated last month
• JuWorkshop / dbus-evsecharger
  Integrate Open_EVSE charger into Victron Energies Venus OS
  ☆19Updated last year
• mr-manuel / venus-os_dbus-mqtt-temperature
  This Venus OS driver gets the data from MQTT and displays it as temperature sensor.
  ☆11Updated last month
• victronenergy / gui-v2
  ☆36Updated this week
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆130Updated last week
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆32Updated last year
• ferelarg / Seplos3MQTT
  Python script to connect a battery pack using BMS Seplos v3.0 to MQTT
  ☆13Updated 9 months ago
• PurpleAlien / jk-bms_grafana
  Read data from a JK BMS and graph it in Grafana
  ☆48Updated last week
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆155Updated 3 weeks ago
• AdamWelchUK / NodeRedEPEverDashboard
  A node red based dashboard for most EPEver/EPSolar solar charge controllers.
  ☆68Updated last year
• chickey / RS485-WiFi-EPEver
  This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…
  ☆68Updated 5 months ago
• madsci1016 / SMAVenusDriver
  A driver to integrate SMA SunnyIsland inverters with Victron Venus OS
  ☆15Updated last year
• victronenergy / dbus-flashmq
  Plugin for FlashMQ that interfaces between DBUS and MQTT.
  ☆38Updated 2 months ago
• tgalarneau / bms
  JBD BMS and Thornwave bluetooth data monitoring
  ☆44Updated 3 years ago
• LHardwick-git / Victron-Service
  Temperature and Humidity d-bus services for Victron GX
  ☆17Updated 2 years ago
• pvtex / Victron_BlueSmart_IP22
  Victron BlueSmart IP22 Charger ve.direct interface
  ☆24Updated last year
• NEEY-electronic / JK
  ☆61Updated 2 years ago
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆13Updated 5 months ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆70Updated last year
• opengd / solar-sis
  solar serial inverter system
  ☆33Updated last year
• FurTrader / Overkill-Solar-BMS-Arduino-Library
  Just the Arduino Library for Overkill Solar BMSs
  ☆34Updated 2 years ago