Alternatives and similar repositories for jep106

Users that are interested in jep106 are comparing it to the libraries listed below

• sipeed / bl602-hal
  Hardware Abstract Layer for BL602 RISC-V WiFi + BLE SoC in embedded Rust
  ☆78Updated last year
• duskmoon314 / aw-pac
  Peripheral access API for Allwinner SoCs generated from unofficial SVD file
  ☆25Updated last week
• cbiffle / rp2040-rustboot
  RP2040 bootloader in Rust
  ☆45Updated 3 years ago
• sipeed / bl602-pac
  Embedded Rust's Peripheral Access Crate for BL602 microcontrollers
  ☆19Updated last year
• tomtor / rust-litex
  Running Rust on the (Linux) Litex VexRiscv FPGA SOC
  ☆14Updated 5 months ago
• adamgreig / ecpdap
  ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.
  ☆69Updated 2 years ago
• adamgreig / ffp
  iCE40 FPGA, SPI flash, and CMSIS-DAP SWD programmer
  ☆70Updated 4 years ago
• riscv-rust / gd32vf103-pac
  Peripheral access crate for GD32VF103
  ☆36Updated last year
• badrobotics / FeRTOS
  FeRTOS is a simple "operating system" that currently supports ARM Cortex-M CPUs
  ☆13Updated 3 years ago
• SmithsDigitalForge / rust-hdl
  ☆30Updated 2 years ago
• jonas-schievink / jaylink
  A Rust library for talking to J-Link USB devices
  ☆42Updated last year
• cs2dsb / stm32-usb.rs
  A dev board designed to facilitate the development of USB firmware for STM32
  ☆30Updated last year
• adamgreig / stm32ral
  Register access layer in Rust for all STM32 microcontrollers
  ☆34Updated 3 years ago
• prjunnamed / prjcombine
  An FPGA reverse engineering and documentation project
  ☆59Updated last month
• nrot / WaveGen
  ☆11Updated 2 years ago
• gd32v-rust / gd32vf103-hal
  Hardware abstract layer (HAL) `embedded-hal` for RISC-V microcontroller GD32VF103 in Rust. Contributions welcomed!
  ☆64Updated 3 years ago
• bouffalolab / bl-pac
  Embedded Rust Peripheral Access Crate for Bouffalo chips
  ☆48Updated 2 years ago
• spacemeowx2 / blflash
  bl602 serial flasher
  ☆56Updated 2 years ago
• bjoernQ / blash
  A tool to flash BL602 via JTAG + serial without pressing buttons / setting jumpers
  ☆12Updated 3 years ago
• dotcypress / ushell
  🐚 Embedded serial shell
  ☆20Updated 11 months ago
• cr1901 / sentinel
  Another size-optimized RISC-V CPU for your consideration.
  ☆58Updated 3 weeks ago
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆90Updated last year
• cyrozap / rv51
  A RISC-V emulator for the 8051 (MCS-51) microcontroller.
  ☆145Updated last year
• riscv-rust / picosoc-example
  Getting started with rust on picosoc
  ☆14Updated 2 years ago
• riscv-rust / gd32vf103xx-hal
  HAL for GD32VF103 microcontrollers
  ☆56Updated last month
• stm32-rs / synopsys-usb-otg
  usb-device implementation for Synopsys USB OTG IP cores
  ☆50Updated last month
• dotcypress / ir-smart-led-controller
  IR Remote Controller for WS2812(or analog) LED Strip
  ☆10Updated 3 years ago
• rp-rs / flash-algo
  ☆18Updated 5 months ago
• sipeed / bl602-rust-guide
  Instructions and examples for BL602 Rust support libraries
  ☆32Updated 4 years ago
• sipeed / TangMega-138KPro-example
  Tang Mega 138K Pro examples
  ☆92Updated 3 months ago