WB2CBA / DX-FT8-FT8-MULTIBAND-TABLET-TRANSCEIVERLinks
☆84Updated 3 months ago
Alternatives and similar repositories for DX-FT8-FT8-MULTIBAND-TABLET-TRANSCEIVER
Users that are interested in DX-FT8-FT8-MULTIBAND-TABLET-TRANSCEIVER are comparing it to the libraries listed below
Sorting:
- ☆103Updated 2 years ago
- Open firmware for all versions of the uSDX transceiver☆108Updated 2 months ago
- Companion PCB's to add ATU, internal battery with charger and a speaker to QRP Labs QMX+ transceiver☆55Updated 8 months ago
- ADX - Arduino Digital Modes HF Transceiver☆119Updated 5 months ago
- Support repository for the 'Digital Radio Receiver' / 'FT8 Decoder' / 'FT8 Radio' app.☆53Updated 8 months ago
- A PCB added to the HL2 with IO resources to control filters and antennas☆48Updated 5 months ago
- ☆198Updated last year
- A tiny SWR and RF power indicator for QRP transceivers☆63Updated 3 years ago
- ☆56Updated 4 months ago
- Updated Thetis with support for Hermes Lite 2 functionality☆48Updated 3 weeks ago
- VP-Digi - a functional, cheap, easy to assemble and configure STM32-based APRS digipeater controller with built-in KISS modem.☆66Updated 3 weeks ago
- M17 modem board for 9600-baud capable radios☆119Updated last month
- Teensy4.X with PJRC audio card Arduino based SDR Radio project.☆57Updated last year
- QO-100 Software Transceiver using an Adalm-Pluto and an SBC (Raspberry, Odroid ...)☆54Updated 11 months ago
- ☆88Updated last year
- Integrated digital modes interface for amateur radio☆107Updated 7 months ago
- Mini17 - QRP M17 handheld☆41Updated 3 years ago
- Control the Elecraft tuner T1 with an ESP32, which connects to the ICOM IC-705 via bluetooth☆15Updated 2 years ago
- An AX.25 only version of the MMDVM firmware☆26Updated last year
- a PCB for a lightweight qrp Balun (1:1, 1:4 or UnUn 1:49)☆130Updated last year
- Python library to interpret and generate UDP packets to communicate with WSJT-X☆32Updated last month
- Automated Compiler for MMDVM_HS Firmware☆13Updated 2 years ago
- ☆22Updated 2 years ago
- Worldwide Network of WSPR Beacons☆60Updated last year
- The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements th…☆104Updated 2 years ago
- A pocket sized FT8 Transceiver utilizing Teensy 3.6, Si4735 and Si5351 technology.☆61Updated 4 years ago
- WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.☆147Updated last year
- A small hardware device for transmitting WSPR messages based on the SI5351 IC which uses GPS for transmission time synchronization and au…☆96Updated last week
- An open standard for a common interconnect between headsets and radios.☆28Updated 11 months ago
- Raspberry pi SDR tranceiver using lvgl gui☆187Updated this week