Tympan / Tympan_Rev_D_HardwareLinks
Repository for Tympan Rev D electronics and case designs
☆15Updated 4 years ago
Alternatives and similar repositories for Tympan_Rev_D_Hardware
Users that are interested in Tympan_Rev_D_Hardware are comparing it to the libraries listed below
Sorting:
- ESP32_CAM meets Etch-A-Sketch => Etch-a-Selfie☆12Updated 5 years ago
- StereoPi KiCad schematics☆43Updated 5 years ago
- Project aiming to transform regular hobby servos into smart ones by replacing their original boards.☆22Updated 9 years ago
- Sensything is an ESP32-based IoT device that has multiple sensor interfaces to read from and send data from both analog and digital senso…☆20Updated 6 years ago
- Experiments using the RPI Zero GPU for FFT (1D and 2D)☆35Updated 3 years ago
- Motorized zoom lens controller Kurokesu SCF4 module featuring STM32 controller and Onsemi LC898201 driver control software☆30Updated 7 months ago
- ☆19Updated 6 years ago
- my raspiraw working fork for high framerate stuff (up to 750/1007 fps for v1/v2 camera)☆92Updated 6 years ago
- ☆34Updated 2 months ago
- This is a *simple* BLE broadcast based sensor net. It is not secure at all.☆14Updated last week
- Yet Another TruePosition GPSDO☆15Updated 3 years ago
- ☆13Updated 3 years ago
- BeagleBoard.org BeagleBone Blue - BeagleBone optimized for educational robotics☆39Updated 5 years ago
- OBJEX EHDK - Energy harvesting DevKit☆19Updated 2 years ago
- 3D files for printing and assembling current and past versions of CogniFly☆34Updated 2 years ago
- A small electronic gizmo that plays rock paper scissors slightly better than random using a recurrent neural network.☆37Updated 5 years ago
- support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop☆22Updated 4 years ago
- ☆17Updated 2 years ago
- Affordable and open-source LIDAR based on three VL53L0X ranging sensor.☆68Updated 7 years ago
- ☆27Updated 3 years ago
- 3D printing and design files☆15Updated 2 years ago
- Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32☆42Updated 3 years ago
- Designer tool for "Lenticular Objects: 3D Printed Objects with Lenticular Lens Surfaces That Can Change their Appearance Depending on the…☆15Updated last year
- Dynamixel controller for AX-12A/W, XL-320 with IMU and BT☆12Updated last year
- SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]☆81Updated last year
- Serial port emulation over CAN bus☆30Updated 2 years ago
- easy-phi☆25Updated 10 years ago
- This repository contains all the materials for the Hackaday Supercon 2019 Pasadena FPGA Badge workshops☆48Updated 5 years ago
- NE Five ROS Metapackage☆23Updated 7 months ago
- GUI-Based Lightning Frame Extractor for Stormchasers and Photographers. ⚡☆28Updated 8 months ago