Alternatives and similar repositories for avrdude-gpio-autoreset

Users that are interested in avrdude-gpio-autoreset are comparing it to the libraries listed below

• casanovg / timonel
  ATtiny85/45/25 I2C bootloader
  ☆113Updated 2 years ago
• psychogenic / SerialUI
  A Serial User Interface for embedded devices, namely Arduinos.
  ☆50Updated 6 years ago
• bitbank2 / I2C_Detector
  Scan I2C buses and identify devices which respond.
  ☆25Updated 6 years ago
• mike-rankin / ESP_trINKet
  ☆71Updated 7 years ago
• cpldcpu / Nanite
  Nano-Sized ATtiny85 devboard with USB Bootloader
  ☆90Updated 9 years ago
• technoblogy / continuity-tester
  A simple continuity tester, based on an ATtiny85 and a piezo buzzer.
  ☆18Updated 8 years ago
• fredlllll / FredUtil-Arduino
  snippets that were too small for their own library
  ☆37Updated 7 years ago
• w-A-L-L-e / anykey-bootloader
  Encrypted or password protected bootloader based on lufa and Arduino caterina.
  ☆25Updated 5 years ago
• derekevans / W25Q16
  Arduino library for the Winbond W25Q16 Serial Flash.
  ☆28Updated 9 years ago
• SasaKaranovic / esp32_wifi_remote
  ☆47Updated 3 years ago
• watterott / ESP-WROOM-Breakout
  Breakouts for ESP8266 and ESP32 WiFi/WLAN + Bluetooth modules from Espressif (ESP-WROOM-02, ESP-WROOM-32)
  ☆34Updated 6 years ago
• OLIMEX / ESP32-PRO
  ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG
  ☆51Updated last year
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆28Updated 7 years ago
• themainframe / thermal-camera
  Firmware for my ESP32-based hand-rolled LWIR camera device
  ☆50Updated 7 years ago
• cnlohr / pi_tpi
  Using a Raspberry Pi to program an ATTiny10 9 5 or 4
  ☆45Updated 2 years ago
• LowPowerLab / DualOptiboot
  Custom Optiboot to add wireless programming capability to Moteino
  ☆74Updated 5 years ago
• septillion-git / QC2Control
  Set the voltage of a Quick Charge 2.0 source via the Arduino.
  ☆68Updated 8 years ago
• tobozo / ESP32-3DPrinter-Bridge
  A network <=> ESP32 <=> USB (FTDI) <=> 3D printer Bridge
  ☆42Updated 7 years ago
• wemos / Arduino_XI
  Arduino core for WEMOS XI Boards
  ☆43Updated 7 years ago
• ericgu / Fade
  ☆55Updated 3 years ago
• bwshockley / Minifigure-SAMD21E
  SAMD21E based Minifigure shaped development board.
  ☆43Updated 7 years ago
• cnlohr / tplink-raw-wifi
  Test using tp-links to do raw wifi.
  ☆44Updated 8 years ago
• lijuno / nRF24_BLE
  Hacking nRF24L01+ as a low-cost BLE beacon
  ☆63Updated 7 years ago
• maugsburger / avr-component-tester
  ☆30Updated 10 years ago
• hkoffer / M5Stack-Thermal-Camera-
  M5Stack Thermal Camera with AMG8833 thermal sensor. The connection between M5Stack & the sensor is I2C
  ☆63Updated 7 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 5 years ago
• moononournation / ATtinyPowerMeter
  ☆37Updated last month
• krdarrah / ESP32_GUI_Programmer
  Processing Based GUI for Programming ESP32 modules based on espota.py
  ☆56Updated 5 years ago
• OLIMEX / ESP32-DevKit-LiPo
  Open Source Hardware OSHW ESP32 development board designed with KiCAD to be pin to pin compatible with Espressif ESP32-DevKitC, but with …
  ☆84Updated 7 months ago
• cpldcpu / USBasp-t
  USBasp for ATtiny85
  ☆33Updated 3 years ago