Alternatives and similar repositories for Teensylu:

Users that are interested in Teensylu are comparing it to the libraries listed below

• ScribbleJ / sjfw
  3D Printer Firmware
  ☆41Updated 13 years ago
• GregFrost / PrusaMendel
  My own RepRap Mendel redesign
  ☆41Updated 12 years ago
• kliment / Klimentkip
  DEPRECATED: Use Sprinter
  ☆29Updated 13 years ago
• kliment / reup
  ☆25Updated 12 years ago
• zelogik / AluXY
  A ful metal CoreXY system for 3D printer, mill etc..
  ☆47Updated 11 years ago
• timschmidt / repsnapper
  RepSnapper RepRap control software
  ☆154Updated 3 years ago
• issus / NEMA8-Juki-Tool-Changer
  Pick and Place tool changer nozzle to hold Juki 500 series nozzles on a NEMA8 hollow shaft motor
  ☆28Updated 8 years ago
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• bitboxelectronics / R2C2_Firmware
  R2C2 -- electronics for RepRap 3D printers (and others), CNC and other machines.
  ☆35Updated 4 years ago
• Printrbot / printrboard
  Reprap Electronics for the Printrbot
  ☆81Updated 7 years ago
• IRNAS / GoodEnoughCNC-PlasmaCutter
  GoodEnoughCNC Hybrid (Plasma, Mill) - very low cost and simple, suitable for everyone
  ☆77Updated 5 years ago
• mariolukas / openexposer
  Open Exposer - Hardware, Slicer, Host, Firmware
  ☆67Updated 8 years ago
• Traumflug / Generation_7_Electronics
  This is part of the RepRap project, see http://www.reprap.org. Gen7 is the next generation of electronics meant to drive a RepRap machine…
  ☆132Updated last year
• Smoothieware / Smoothie2-old
  (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.
  ☆34Updated 7 years ago
• johnnyr / Mini-Rambo
  ☆14Updated 7 years ago
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆27Updated 6 years ago
• cdsteinkuehler / bobc_hardware
  CRAMPS - A Cape version of the RAMPS-FD design for 3D printing
  ☆45Updated 6 years ago
• xboxhacker / OpenFeeder
  OpenSource feeder for DIY and OpenPNP community
  ☆32Updated 9 years ago
• Traumflug / Visolate
  Visolate is an application for calculating machining toolpaths (G-code) for manufacturing printed circuit boards (PCBs) by isolation mill…
  ☆88Updated last year
• gnea / grbl-LPC
  ☆74Updated 3 years ago
• clementleger / Smoothieware-STM32
  [DEPRECATED] Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆38Updated 9 years ago
• MakerChetan / 3D-Printing-ESP8266
  ☆43Updated 7 years ago
• reprap / electronics
  RepRap Electronics
  ☆25Updated 13 years ago
• bobc / bobc_hardware
  Various hardware projects
  ☆86Updated 7 years ago
• GermanRepRap / Ramps-1.4.2
  forked from ultimachine/Ramps 1.4
  ☆64Updated 11 years ago
• nallath / PostProcessingPlugin
  ARCHIVED; Now part of Cura itself.
  ☆18Updated 7 years ago
• 3Dartists / AlligatorBoard
  Alligator Board - 3D Printer Controller
  ☆21Updated 10 years ago
• mattvenn / cad
  cad files for cnc machining
  ☆68Updated 5 years ago
• whosawhatsis / RepRap-Wallace
  A parametric Reprap printer based loosely on the Printrbot design
  ☆71Updated 6 years ago
• ChristianLerche / 3DPCB
  3DPCB DRV8825 files - KiCAD
  ☆9Updated 8 years ago