Siliconinsid / SCSIknifeLinks
SCSIknife - A compact and versatile SCSI emulator
☆15Updated 10 months ago
Alternatives and similar repositories for SCSIknife
Users that are interested in SCSIknife are comparing it to the libraries listed below
Sorting:
- A low-profile SCSI adapter from male 50-pin to male DB-25☆25Updated 4 years ago
- 4 MB Fast RAM Expansion for the Commodore Amiga 600☆41Updated 4 years ago
- This is an Enhanced version of the 1581 Drive PCB.☆57Updated last year
- Amiga 2000 Mechanical Keyboard Clone☆24Updated 4 years ago
- Amiga 500 Custom Mechanical Keyboard☆41Updated 2 months ago
- ISA SCSI card with BIOS and spot of software SCSI emulation with STM32☆16Updated 3 years ago
- The Ultimate Amiga RGB to VGA filtered buffered let-those.ugly-barrels-away adapter☆34Updated 3 weeks ago
- Mechanical keyboard for the Amiga 2000/3000/4000.☆24Updated 2 years ago
- A small SCSI device based on Teensy 3.5☆12Updated 2 months ago
- Bootloader & Firmware Updater☆20Updated last year
- Atari firmware for TF530/TF534 accelerator cards☆18Updated 3 years ago
- IDE Autoboot patch for TOS 1.04, 1.06, 1.62☆12Updated 3 years ago
- SPI adapter that connects to the parallel port of an Amiga☆51Updated 6 months ago
- This is a PCB based on the Steve White schematic. You just plug on the top of a RPI 3 and you have a fully working 1541 disk emulator :)☆18Updated 5 years ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆29Updated 3 years ago
- A replica of the Prelude ZII sound card for the Amiga.☆34Updated last year
- Hardware design of a (up to) 2MB cartridge for the Commodore 264 line of computers (Commodore 16, 116 and plus/4)☆28Updated 9 months ago
- plipbox PCB☆13Updated 4 years ago
- A replacement RF modulator for the Commodore 64 longboard variants☆23Updated 3 months ago
- Adapter to fit the older 1MB Agnus to the A500+☆19Updated 3 years ago
- A1000 Rejuvenator☆52Updated last year
- Open Hardware Fast Loader cartridge for the Commodore 64 and 128 - DO NOT USE!!!☆48Updated last year
- Amiga 500 8MB FastRAM and IDE interface☆35Updated last year
- ☆33Updated last year
- Open source clone of the Commodore 128 computer☆66Updated 6 months ago
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆20Updated 4 years ago
- Amiga clock port to Raspberry Pi interface (alternate PCB layout)☆16Updated 2 years ago
- single 12V Power supply module for Amiga 500 computers☆31Updated 4 years ago
- A simple modulator replacement for Commodore 64s with "longboards", complements my Lumafix version as well adding an audio connector for …☆38Updated 6 years ago
- Terriblefire TF1230☆30Updated 4 years ago