Alternatives and similar repositories for RAK-STM32-RUI

Users that are interested in RAK-STM32-RUI are comparing it to the libraries listed below

• azerimaker / Penguino-STM32WL-LoRa-E5
  This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
  ☆40Updated 4 years ago
• hallard / RAK3172-Breakout
  STM32WL LoRaWAN Breakout board for RAK3172
  ☆35Updated 2 years ago
• danak6jq / RAK3172
  Port of STM32WLxx example for RAK3172
  ☆35Updated 2 years ago
• TheThingsIndustries / generic-node-se
  Generic Node Sensor Edition
  ☆121Updated 2 years ago
• GrumpyOldPizza / ArduinoCore-stm32l0
  Arduino Core for STM32L0
  ☆126Updated 3 years ago
• stm32duino / STM32LoRaWAN
  Arduino library to support LoRaWAN communication using the STM32WL series.
  ☆51Updated last month
• azerimaker / Penguino-SAMR34
  This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.
  ☆61Updated 5 years ago
• will127534 / LoRa-GW-FeatherWing
  A simple SX1303 based LoRa Gateway for FeatherWing ecosystem.
  ☆25Updated 4 years ago
• hallard / LoRa-E5-Tiny
  LoRa-E5 Tiny cell coin STM32WL LoRaWAN board
  ☆34Updated 4 years ago
• krzychb / esp32-lna
  Example code and description how to use ESP32 low noise amplifier (LNA), including Arduino library and ESP-IDF component
  ☆55Updated 5 years ago
• Seeed-Studio / LoRaWan-E5-Node
  Applications on LoRa-E5 mini/ LoRa-E5 Development Kit with v1.1.0 STM32Cube MCU Package for STM32WL series(SDK)
  ☆77Updated last year
• kriswiner / CMWX1ZZABZ
  Collection of sketches using the Arduino core for Murata's CMWX1ZZABZ (STM32L082 and SX1276)
  ☆101Updated 2 years ago
• NamNamIoT / ArduLora
  Lora/LoraWan Arduino board
  ☆82Updated 3 months ago
• stm32duino / I-NUCLEO-LRWAN1
  Arduino library to support I-NUCLEO-LRWAN1 LoRa® expansion board based on USI® LoRaWAN™ technology module.
  ☆17Updated 4 months ago
• tinytronix / SX126x
  An Arduino Library for LoRa Communication using DRF1268T or DRF1262T (based upon Semtech SX1268 or SX1262)
  ☆64Updated 3 years ago
• hallard / LoRa-E5-Breakout
  LoRa-E5 Breakout board
  ☆40Updated 3 years ago
• will127534 / SX1302_Arduino_Library
  A ported Arduino Library for SX1302 from SX1302 HAL
  ☆23Updated 4 years ago
• Conexiotechnologies / conexio-stratus-board-schematics
  nRF9151 Design files for Conexio Stratus IoT dev kit and shield
  ☆31Updated 3 months ago
• MicrochipTech / atsamr34_lorawan_rn_parser
  "IoT Made Easy!" - Control SAM R34 or WLR089U0 Module with ASCII command set over UART
  ☆20Updated last month
• LacunaSpace / basicmac
  BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino
  ☆81Updated 5 years ago
• chandrawi / LoRaRF-Arduino
  Arduino library for basic transmitting and receiving data using LoRa and FSK modulation
  ☆76Updated 2 years ago
• MGX3D / CurrentViewer
  Interactive charting for LowPowerLab CurrentRanger: capture and share GIF animations with power state profiles/swings for IoT devices
  ☆32Updated 5 years ago
• cjhdev / lora_device_lib
  A LoRaWAN Device Library
  ☆34Updated last year
• gluedig / nrf52-lora
  LoRa node on nRF52
  ☆31Updated 8 years ago
• xreef / EByte_LoRa_E22_Series_Library
  Arduino LoRa EBYTE E22 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards).. sx1…
  ☆140Updated 2 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆13Updated 5 years ago
• dragino / LoRa_STM32
  Source code for Dragino LoRa module base on STM32 Chip
  ☆83Updated 2 years ago
• danak6jq / Seeed-LoRa-E5
  LoRaWAN end node built from scratch using CubeMX for WLE5x in the LoRa-E5
  ☆59Updated 2 years ago
• arduino-libraries / MKRWAN
  An Arduino library for sending and receiving data using LoRaWAN protocol and LoRa® radios.
  ☆91Updated 3 weeks ago
• shridattdudhat / Raspberry-Pi-Compute-Module-4-Eagle-Footprint
  New Raspberry Pi Compute Module 4 Eagle Library and 3D Models
  ☆39Updated 3 years ago