Alternatives and similar repositories for PCB:

Users that are interested in PCB are comparing it to the libraries listed below

• tinkrmind / programmable-air
  A hardware kit to experiment with inflatable and vacuum based soft robotics.
  ☆60Updated 6 years ago
• Programmable-Air / Code
  Arduino library for Programmable-Air
  ☆48Updated 5 months ago
• oujifei / pneuduino
  pneuduino lib
  ☆14Updated 6 years ago
• bdring / Grbl_ESP32_TMC2130_Plotter_Controller
  ☆65Updated 4 years ago
• kriswiner / AS7265X
  18-channel, 40-nm FWHM spectrometer
  ☆19Updated 4 years ago
• bobricius / mbot
  2D actuator
  ☆27Updated 5 years ago
• zakqwy / cyborg_ring
  Cordwood-style blinky ring, powered by an ATtiny85 and a pair of size 10 Zn-air hearing aide batteries.
  ☆38Updated 6 years ago
• sparkfunX / Buzzard
  Software tools for EAGLE silkscreen generation
  ☆100Updated 2 years ago
• hzeller / rpt2paste
  Convert KiCAD rpt files to G-Code to dispense solder paste
  ☆24Updated 10 years ago
• superzerg / TCD1304AP_teensy2pp
  direct control and reading of the TCD1304AP linear CCD array by a teensy 2++ (https://www.pjrc.com/store/teensypp.html)
  ☆30Updated 8 years ago
• cody82 / grblgui
  GUI for grbl.
  ☆51Updated 7 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 4 years ago
• OpenSAMOfficial / OpenSAM
  OpenSAM by OHM - 3D Printed Camera Stabilizer
  ☆54Updated 7 years ago
• kitspace / partinfo
  A microservice to get information on electronic components.
  ☆37Updated 2 years ago
• fluidfred / powerlolu
  High Power Pololu Board based on A4989 - can be connected to RAMPS Pololu port
  ☆30Updated 10 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 7 years ago
• Hyvok / Inkscape-rotary-encoder-disk-generator
  Inkscape extension for creating optical rotary encoder discs
  ☆52Updated 4 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 8 years ago
• issus / NEMA8-Juki-Tool-Changer
  Pick and Place tool changer nozzle to hold Juki 500 series nozzles on a NEMA8 hollow shaft motor
  ☆28Updated 8 years ago
• invent2main / s2a
  RepRap projects
  ☆20Updated 7 years ago
• evezor / Cartesian-to-SCARA-Converter
  This script will convert gcode from cartesian space to SCARA space
  ☆29Updated 7 years ago
• uStepper / uStepperS
  ☆54Updated last year
• upsidedownlabs / BioAmp-v1.5
  Upside Down Lab's Biopotential Amplifier v1.5 - Buy on Tindie at https://bit.ly/BioAmp-v1_5
  ☆32Updated last year
• Laser4DIY / Laser-Driver-v2
  MCU-based multipurpose Laser Diode driver
  ☆18Updated 3 years ago
• kadeturn / Micro-Stepper
  ☆38Updated 3 years ago
• thomasdob / tdstatv3
  A USB-controlled potentiostat/galvanostat for thin-film battery characterization
  ☆18Updated 2 years ago
• robertstarr / ulp_user
  Eagle ULP User Language Program script files
  ☆34Updated last year
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 4 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆75Updated 4 years ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago