PowerCartel / PackProbeLinks
Arduino code to read Smart Battery data from laptop battery packs using SMBus/I2C
☆113Updated 10 years ago
Alternatives and similar repositories for PackProbe
Users that are interested in PackProbe are comparing it to the libraries listed below
Sorting:
- Arduino sketch, which helps detecting the connections of the I2C interface and prints info available from the SMB (SmartBatteryModule) la…☆122Updated 7 months ago
- Reverse engineering of the gm328a transistor tester + Tetris☆53Updated 5 years ago
- (de)soldering station☆29Updated 8 years ago
- cheap lipo charger☆31Updated 10 months ago
- Open-Source firmware for the ZPB30A1 electronic load (WIP)☆50Updated 7 years ago
- Smart Battery System for ESP☆73Updated 6 years ago
- Reflow Oven Controller. See below for more information.☆79Updated 5 years ago
- Alternative firmware for the B3603☆67Updated 6 years ago
- My repo for experimenting with the usbasp firmware from www.fischl.de☆36Updated 7 years ago
- Reflow Oven Controller with EPS32 and Webapp☆40Updated 5 years ago
- JDY-08 Bluetooth transparent transmission module, with resource for KiCAD☆64Updated 3 years ago
- CODE: Custom firmware for Youyue 858D+ (ATmega168/328P)☆169Updated 7 years ago
- The Little Stick Welder with Big Features.☆43Updated 3 years ago
- Custom firmware for the chinese ksger soldering iron controller☆170Updated 4 years ago
- The soldering controller for hakko 907 with lcd screen☆29Updated 6 years ago
- SMBUS analyzer tool using an Arduino Pro Mini for Smart Batteries that use the Smart Battery System Specification.☆30Updated 5 years ago
- Wildcat's firmware for the DS203/Quad pocket oscilloscope☆123Updated 2 years ago
- Set the voltage of a Quick Charge 3.0 source via the Arduino.☆213Updated 2 years ago
- Arduino based hacking tool for smart batteries using SMBus.☆171Updated 3 years ago
- Arduino-based battery internal resistance meter☆45Updated 8 years ago
- ATtiny85/45/25 I2C bootloader☆113Updated 2 years ago
- Set the voltage of a Quick Charge 2.0 source via the Arduino.☆68Updated 7 years ago
- DIY Electronic load for DCDC converter characterization☆50Updated 4 years ago
- Modification of USBasp firmware to support UART debugging.☆63Updated 5 years ago
- A sketch to allow you to update the 24C02 on a DTM0660 based meter.☆15Updated 8 years ago
- VC288 Volt-amp meter alternative firware. Targets the cheap DSN-VC288 volt-amp meter and the STM8S003F MCU.☆25Updated 4 years ago
- The ultimate battery tester with ESR measurement and discharge graph. Based on an Arduino Nano and a 1602 LCD.☆49Updated 2 months ago
- nRF24-based RC car receiver, compatible with HobbyKing HK310 and Turnigy 3XS☆41Updated 5 years ago
- An Arduino 2.4GHz and IR remote controller☆36Updated 7 years ago
- A python gui to display & control DPS5005 power supply☆77Updated 2 years ago