Alternatives and similar repositories for boilr

Users that are interested in boilr are comparing it to the libraries listed below

• lostcontrol / wattpilot
  Optimize your energy consumption
  ☆11Updated 2 months ago
• nielstron / pyfronius
  Automated JSON API based communication with Fronius Symo
  ☆27Updated last month
• aukedejong / domoticz-fronius-inverter-plugin
  Domoticz Fronius Inverter plugin
  ☆9Updated 2 years ago
• redpomodoro / byd_battery_box
  Home assistant Custom Component for reading data from BYD Battery Box. This integration uses a local modbus connection.
  ☆11Updated 2 months ago
• jomjol / water-meter-picture-provider
  ☆44Updated 3 years ago
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆79Updated 2 years ago
• Victor-Mo / IRT-ESP
  Nefit / Buderus iRT protocol encoder / decoder for ESP8266
  ☆22Updated 4 years ago
• ardexa / sma-rs485-inverters
  Collect from SMA RS485 Inverters and send the data to your cloud using Ardexa
  ☆30Updated 4 years ago
• ffcrg / ecpiww
  A wireless EnergyCam Setup with a Raspberry Pi to monitor the energy usage
  ☆34Updated 9 years ago
• domschl / python-fhem
  Python FHEM (home automation server) API
  ☆15Updated last year
• 1coderookie / BSB-LPB-LAN
  Handbuch zur BSB-LAN Hard- & Software
  ☆35Updated 11 months ago
• akleber / fronius-json-tools
  Python tools to work with the json data of the Fronius Solar API
  ☆48Updated 2 years ago
• RalfJL / VE.Direct2MQTT
  Use a esp32 to push VE.Direct ASCII messages to a MQTT server
  ☆60Updated last year
• thorsten-gehrig / KnxTpUart
  This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig
  ☆49Updated 7 months ago
• JAndrassy / Regulator
  DIY Arduino consumption regulator build to use excess solar power for auxiliary 'summer' heating. The solar power data are retrieved over…
  ☆54Updated 6 months ago
• dnknth / node-red-contrib-fritzapi
  Home automation node for Fritz!Box, Fritz!DECT and FRITZ!Powerline devices.
  ☆18Updated 2 years ago
• Brovning / fronius
  IP-Symcon (IPS) Modul für Fronius Inverter (Wechselrichter) und SmartMeter (Energiezähler) mit ModBus TCP Unterstützung (bspw. Galvo, Pri…
  ☆18Updated 2 years ago
• jrbenito / ABBAurora
  ABB Aurora protocol (also used by former PowerOne in their Aurora Inverters) for communication with inverters and other devices
  ☆27Updated 4 years ago
• stormmurdoc / victron_sdm630_bridge
  MQTT-dbus Bridge for Victron CerboGX (Venus) and Eastron SDM630 Power Meter
  ☆27Updated last year
• physee / Victron.Arduino-ESP8266
  Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…
  ☆128Updated 3 years ago
• MTJoker / HomeStatusDisplay
  Show smart home status information sent via MQTT using RGB LEDs.
  ☆22Updated 7 years ago
• InfernoEmbedded / PowerScraper
  A scraper for power devices to feed data to OpenEnergyMonitor
  ☆35Updated last month
• Supergiovane / node-red-contrib-knx-ultimate
  Control your KNX intallation via Node-Red! A bunch of KNX nodes, with integrated Philips HUE control and ETS group address importer.
  ☆162Updated last week
• bbqkees / EMS-Wiki
  Buderus Logamatic EMS and EMS+/EMS Plus bus Wiki for Bosch, Buderus, Nefit, Junkers, Worcester devices
  ☆46Updated 4 years ago
• americanium / fronius_sm_simulator_rtu
  ☆10Updated last year
• openv / vcontrold
  vcontrold Daemon for control and logging of Viessmann® type heating devices
  ☆112Updated 8 months ago
• sbiermann / esp8266-anemometer
  ESP8266 based wind anemometer project
  ☆33Updated 5 years ago
• victronenergy / velib_python
  Victron Energy Python library
  ☆39Updated last week
• KinDR007 / Victron-MPPT-ve.direct-to-MQTT
  Read data from victron mppt and transport to mqtt server
  ☆42Updated 2 years ago
• psyciknz / ParadoxIP150v2
  Python-based IP150 'middle-ware' that uses the IP module's software port for monitoring and control of the alarm via an MQTT Broker. La…
  ☆16Updated 5 years ago