PWRFLcreative / Spore
Spore WiFi LED module. Firmware and Hardware.
☆24Updated 2 years ago
Alternatives and similar repositories for Spore:
Users that are interested in Spore are comparing it to the libraries listed below
- Project to store DMX frames received over ArtNet into a SD card and play them back to a WS2812B LED strip using nodemcu☆41Updated 6 years ago
- Contains arduino code for driving neopixel LED's over Wifi via UDP. Tested with ESP32 chip. Also contains touchdesigner file for streamin…☆13Updated 2 years ago
- A library for sending DMX-512 messages in an sACN packet over UDP☆16Updated this week
- a Pixelmapping software for the ESP32 and ESP8266 for addressible LED Strips, with a OSC controll interface and FFT☆36Updated last month
- A hardware based animation library,pixel driver & dynamic led mapping system for addressable LEDs☆44Updated 4 years ago
- Sending pixels from TouchDesigner to Fadecandy☆17Updated 9 years ago
- The SparkFun ESP32 DMX to LED Shield is capable of DMX output, input, as well as Artnet input.☆14Updated 5 years ago
- Examples of integration of Smartmatrix and FastLED☆14Updated 4 years ago
- ☆19Updated last year
- A board for driving 32 strings of pixels from a Teensy 4.1. Similar to the OctoWS2811, but with 32 outputs.☆14Updated 3 years ago
- LED mapping in Touchdesigner☆24Updated 6 years ago
- Independently configure and display to various LED devices in one sketch with parallel DMA-driven LED output.☆31Updated last month
- A collection of DMX512 examples☆48Updated this week
- An ArtNet driver for a 14x14 pixel LED Matrix☆31Updated last year
- Streaming Led pixel control☆100Updated last year
- FFT/FHT library for FastLED☆22Updated 10 years ago
- Processing and Arduino code for automatic addressable LED mapping☆28Updated 6 years ago
- Module to manage WLED (led strip fw) from Chataigne☆15Updated 2 months ago
- With this project its possible to drive Ws2812 Leds with Artnet over Wifi (with Jinx! or Glediator) and it´s also possible to switch to t…☆29Updated 6 years ago
- ☆10Updated 2 years ago
- Fork of code found on: <http://vvvv.org/contribution/artnet-arduino-set-v2>. This code can be used to send and receive Artnet packets wit…☆22Updated 12 years ago
- An Arduino ESP32/ESP8266 library for extremely rapid IoT web page UI creation☆27Updated 3 months ago
- A dynamic, generic & N-pixel ArtNet via WIFI to Neopixel (WS2812, SK6812) driver☆18Updated 5 years ago
- Controlling of 32x32 or 16x32 RGB LED displays using Raspberry Pi rpi-rgb-led-matrix with Art-Net☆33Updated 6 years ago
- Code for the Megapixel Controller using E1.31☆15Updated 5 years ago
- Port of Fadecandy firmware to run on SmartMatrix☆13Updated 4 years ago
- Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.☆13Updated 10 months ago
- Run code for SmartMatrix, Adafruit-GFX-Library, FastLED (2D), and LEDMatrix on linux/Raspberry Pi with X11, SDL, or on top of RGBPanels☆29Updated last month
- DMX Transmit and Receive for Teensy with RDM support.☆51Updated 6 years ago
- LXTeensyDMX is a driver for sending or receiving DMX using a Teensy 3.2☆9Updated 5 years ago