Nucular-tech / LEVCAN
Light Electric Vehicle CAN protocol
☆25Updated last month
Alternatives and similar repositories for LEVCAN:
Users that are interested in LEVCAN are comparing it to the libraries listed below
- A 3 phase motor controller implemented on an STM32☆35Updated 6 years ago
- ☆44Updated 5 years ago
- Ethernet-CAN converter board based on STM32F407☆24Updated 2 years ago
- CAN bus gateway over USB☆21Updated 3 years ago
- ☆63Updated 9 years ago
- Phobia Motor Controller☆53Updated last week
- OpenBLDC Strip (STM32F103)☆65Updated 7 years ago
- Fast and simple STM32F4xx UART bootloader☆23Updated 2 years ago
- Open source project that uses the CANable hardware from protofusion.org☆36Updated 4 years ago
- Main firmware of the Huebner inverter project☆168Updated last week
- slCAN compatible firmware for STM32f103C8T6☆65Updated 2 years ago
- ☆42Updated last year
- Reading the K-line of the bus according to ISO 14230-4 KWP 10.4 Kbaud☆24Updated 4 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆64Updated 3 years ago
- BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility.☆38Updated last year
- Qt Creator "Bare-Metal" Qbs Project Templates for STM32 Development with STM32CubeMX☆16Updated 4 years ago
- Documentation for retrieval/recovery of corrupt ST-Link/V2 firmwares for both the standalone and embedded ST-Link in-circuit programmer/d…☆26Updated 11 years ago
- can bootloader for use with stm32 microcontrollers☆39Updated 3 years ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆63Updated 2 years ago
- University project: Simple micro-inverter using a STM32F103C8☆29Updated 3 years ago
- MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V☆40Updated 3 years ago
- High voltage high power ESC using VESC logic☆52Updated 5 years ago
- Partial Lawicel/SLCAN implementation at 1 Mb/s CAN speed and 460800 UART baud rate☆28Updated 6 years ago
- UAVCAN for STM32 Arduino☆41Updated 4 years ago
- Simple library for get 9V/12V/configurable output with step 0.2V from chargers with Quick Charge 2.0/3.0.☆12Updated 3 years ago
- High performance CAN-USB/CAN-UART adapter + UAVCAN devboard☆36Updated 2 years ago
- Firmware for the cheapest can sniffer☆35Updated 8 months ago
- libopencm3 DS18B20 stm32f103c8t6☆30Updated 5 years ago
- Libraries for working with microcontrollers STM32.☆59Updated 2 years ago