Alternatives and similar repositories for SecureLoader

Users that are interested in SecureLoader are comparing it to the libraries listed below

• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 7 years ago
• lujji / st-link-dumper
  ST-Link dumper firmware
  ☆54Updated last year
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 8 years ago
• ketszim97 / USB_PD_Sink
  USB Sink based around the STUSB4500
  ☆27Updated 5 years ago
• smdprutser / SWM050
  ☆19Updated 7 years ago
• morganrallen / esp32-kicad
  KiCad Library for ESP32
  ☆24Updated 10 years ago
• openwch / ch34x
  CH340, CH343, CH342, CH344,CH348
  ☆37Updated 2 years ago
• tannewt / tinylogicfriend
  TinyUSB-based logic analyzer code for Sigrok
  ☆28Updated 4 years ago
• atc1441 / CH55xOneClickCompiler
  CH551 to CH554 One Click SDCC Compiler
  ☆24Updated 4 years ago
• jeanthom / stlink-tool
  Firmware uploader for ST-Link
  ☆70Updated last year
• vinodstanur / qi_wireless_receiver_attiny13
  A Qi wireless power receiver using attiny13
  ☆58Updated 6 years ago
• ketszim97 / Mini_PD
  Miniature version of the USB_C_PD with the STUSB4500
  ☆27Updated 5 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 6 years ago
• benedekkupper / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 4 years ago
• Jana-Marie / stm32f072-USB-PD
  stm32f072 USB-PD standalone firmware
  ☆18Updated 6 years ago
• deadsy / jaylink
  Go bindings for the libjaylink library.
  ☆10Updated 2 years ago
• stfrank / ST-Link-V2-Firmware
  Documentation for retrieval/recovery of corrupt ST-Link/V2 firmwares for both the standalone and embedded ST-Link in-circuit programmer/d…
  ☆30Updated 12 years ago
• slimelec / ollie-hw
  ☆73Updated 3 years ago
• lupyuen / bluepill-bootloader
  MakeCode UF2 bootloader for STM32 Blue Pill
  ☆77Updated 2 years ago
• p-v-o-s / Arduino-HScompression
  Arduino library that uses the open source Heatshrink compression library
  ☆23Updated 9 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 5 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated 4 months ago
• abcminiuser / dmbs
  Dean's Makefile Build System - making MAKE easier.
  ☆51Updated 5 years ago
• cortexprog / cortexprogfw
  ☆29Updated 5 years ago
• cjacker / wchlinke-mode-switch
  Deprecated, use 'wlink' instead. Command line tool to switch WCH-LinkE modes between DAP and RV from host.
  ☆10Updated last year
• vdm-dev / stm32-ch340
  The firmware for STM32F103 microcontrollers that emulates CH340 IC (USB to UART interface)
  ☆27Updated 8 years ago
• UweBonnes / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆28Updated 3 months ago
• mars-low / scoppy-pico
  RPi Pico/RP2040 firmware for the Scoppy Oscilloscope
  ☆22Updated 4 years ago
• martonmiklos / EAGLE-libraries
  Collection of my libraries for the Autodesk EAGLE CAD tool
  ☆22Updated 4 years ago
• rasgo-cc / Gecko-Loader
  CLI and GUI utility to upload code to EFM32 microcontrollers through the UART or USB bootloader
  ☆19Updated 9 years ago