Miceuz / k-thermocouple-libLinks
Converts K thermocouple voltage to temperature with linearization and cold junction compensation
☆33Updated 10 years ago
Alternatives and similar repositories for k-thermocouple-lib
Users that are interested in k-thermocouple-lib are comparing it to the libraries listed below
Sorting:
- STM32 USB device bootloader using DFU class interface☆103Updated last year
- Serial bootloader for STM8 microcontrollers☆99Updated 9 months ago
- Ported Arduino libraries ready for STM32duino project.☆49Updated 7 years ago
- DMA-accelerated multi-UART USB CDC for STM32F072 microcontroller☆57Updated 6 years ago
- C-based firmware loader for STM32's serial bootloader☆93Updated 8 years ago
- This is a clone of an SVN repository at svn://mikrocontroller.net/irmp. It had been cloned by http://svn2github.com/ , but the service wa…☆37Updated 7 years ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆166Updated 8 years ago
- DFU bootloader for STM32F103, for use with any F103 code and target☆31Updated 9 years ago
- GPIB to USB adapter firmware for a Cortex M0 ARM microcontroller☆34Updated 11 years ago
- "libemb" is a collection of libraries which try to make things needed in many STM32 (ARM-Cortex-M3) or MSP430 (MSP430G2553) based project…☆58Updated 2 years ago
- LeafLabs Maple Hardware Design Files☆109Updated 13 years ago
- miscellaneous stuff / unsorted☆99Updated last week
- Symbols, footprints and 3d models for use with Altium Designer☆54Updated last year
- Bootloader firmware for the Maple ARM Cortex-M3 development board from LeafLabs☆142Updated 11 years ago
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- CAN-BUS TO USB-UART(STM32F042)☆24Updated 9 years ago
- PC tool for uplading hexfiles to the STM8 microcontroller via UART or SPI , using the built-in ROM bootloader. Works under Windows and Po…☆87Updated last year
- Olimex KiCAD components and footprints☆74Updated 7 months ago
- Main Probe Scope PCB Repo☆57Updated 6 years ago
- STM32F103 Dual CDC☆66Updated 12 years ago
- Web App for flashing STM microcontrollers (STM8 and STM32) over serial port using the embedded ROM bootloader.☆39Updated 4 years ago
- Cross-platform STLink v2 GUI☆189Updated 5 years ago
- ARM Bare Metal Widget (arm-bmw) software☆19Updated 8 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆90Updated 5 years ago
- BSP for N76E003 Series 8051 MCU☆48Updated 2 years ago
- 6-channel data monitor☆34Updated 9 years ago
- ST-Link dumper firmware☆54Updated last year
- A MSD (Mass Storage Device) USB bootloader for a PIC18F47J53 with an external SPI flash chip. I'm writing this primarily for my MPPT Sola…☆13Updated 7 years ago
- A simple CAN to USB bridge for STM32F4☆15Updated 12 years ago
- iMX RT 1020 CPU module☆35Updated 5 years ago