MaxwellXyao / SOLGUI_V2Links
一个原创的12864OLED专用的迷你GUI。包括菜单页面，功能页面；可显示二值图片和图表，进行整数和小数参数调整，适合于飞思卡尔智能车比赛使用。
☆27Updated 8 years ago
Alternatives and similar repositories for SOLGUI_V2
Users that are interested in SOLGUI_V2 are comparing it to the libraries listed below
Sorting:
- STM32内部Flash模拟成U盘，实现拖拽Hex/Bin文件进行固件升级☆47Updated 6 years ago
- 一个基于小型单片机的菜单事件驱动框架☆46Updated 3 years ago
- STM32F103 and ADS1256 are used to build a data acquisition system.☆52Updated 6 years ago
- 重画Stlink_V2.1的PCB，使能够装进以前CH340，USB转串口同款铝合金成品外壳中。☆56Updated 6 years ago
- DAP-Link with USB Type-C interface based on stm32f103cbt6☆36Updated 6 years ago
- 3D package library collection☆74Updated 7 years ago
- a petite driver base on mcu such as stm32(f103/f407/h750), RT1052☆103Updated 11 months ago
- Bootloader for stm32f10x，IAP by usart3☆36Updated 5 years ago
- 基于USB的离线固件更新器☆22Updated 2 years ago
- STM32平台的无线下载功能开发☆27Updated 6 years ago
- LVGL demo test☆36Updated 5 years ago
- Agile Modbus 在 MCU 上的例子☆52Updated 2 years ago
- STM32 IAP(UART模式)的Application部分（USMART版）☆79Updated 6 years ago
- 单片机引导程序☆75Updated 6 years ago
- 无刷电机矢量驱动板☆172Updated last year
- DAPLink project base on rt-thead OS .☆95Updated 5 years ago
- 使用STM32的虚拟串口模拟CH340☆30Updated 5 years ago
- SphinxEVK hardware design files, including PDF schematics and AltiumDesigner PCB layout.☆47Updated 6 years ago
- STM32-based SWD protocol offline downloader☆74Updated 7 years ago
- STM32 IO口模拟实现软件串口。☆56Updated 6 years ago
- 基于STLinkV2/1的STM32编程器和flash烧写器☆84Updated 8 years ago
- AT指令解析框架，开发环境STMS32F103ZE，HAL库，通信模组使用移远BC28☆58Updated 6 years ago
- Generic STM32 serial bootloader, with a simple command-line interface☆158Updated 2 years ago
- STM32F103C8T6的Boot程序。支持通过Y-mode协议进行IAP升级☆29Updated 7 years ago
- A compact and easy to use event-driven button driver module. | 一个小巧易用的事件驱动按钮驱动模块.☆101Updated last year
- U8g2 for rt-thread - a monochrome graphics library☆78Updated 2 years ago
- 基于RT-Thread物联网操作系统的dwin串口屏幕快速开发库!☆61Updated 7 years ago
- ☆59Updated 11 years ago
- 纯C语言实现的一个按键驱动，可移植性强，支持单双击、连按、连按释放、长按；采用回调处理按键事件（自定义消抖时间），使用只需3步，1：创建按键，2：按键事件与回调处理函数链接映射。然后周期检查按键。☆17Updated 5 years ago
- JLink_ARM_OB based on stm32f072☆64Updated 7 years ago