Alternatives and similar repositories for Voron_Mods:

Users that are interested in Voron_Mods are comparing it to the libraries listed below

• GiulianoM / PTC_Heater_Mount
  Mounting plate for a 110V 500W PTC Heater module. Fits on Voron 2.4 bed rails.
  ☆50Updated 3 months ago
• MakerBogans / Fourbie
  AWD 2.4 Mod with VZBot belt spacing on X gantry
  ☆63Updated last year
• majarspeed / Voron-9mm-belt-mod
  ☆31Updated 2 years ago
• ruiqimao / Sapphire
  Sapphire 3D Printer
  ☆23Updated 9 months ago
• jakub874 / Jakub3DPrinterMods
  ☆53Updated 4 months ago
• ruiqimao / VoronStuff
  Collection of my Voron mods
  ☆39Updated last week
• skuep / GBB15
  A gantry-mounted CAN stepper driver board for 15mm aluminum beams (mostly for PrintersForAnts printers). This is heavily work in progress…
  ☆42Updated 9 months ago
• zruncho3d / poke
  Poke is a flexure-based hotend-mount Z probe for Printers for Ants
  ☆65Updated last year
• kevinakasam / SwitchThread
  A smol Switchwire
  ☆46Updated 9 months ago
• FrankenVoron / Trident-EZBake
  ☆62Updated 2 years ago
• TheRealDeathsneeze / Deconstruder
  An alternative toolhead for the Voron V0, with v0.1 carriage and NF-Crazy hot end
  ☆22Updated 6 months ago
• KayosMaker / 1515PanelClips
  A resized and reworked version of Annex's panel clips, to work with 1515 based printers.
  ☆70Updated last year
• Amekyras / tulip
  Tulip - a pin mod with front idler tensioners for the Voron v0.2
  ☆73Updated 3 weeks ago
• Armchair-Heavy-Industries / Trailhead-XY-Joints
  Modified XY joints for the Voron 2.4 and Trident
  ☆45Updated last year
• DraftShift / Tophat
  ☆29Updated 3 months ago
• BlackNet / Voron_2.4
  This is my Voron V2.4r2 350mm config work zone!
  ☆4Updated this week
• zruncho3d / vampire_bat
  a pinned extrusionless gantry with pin-in-tube belt clips
  ☆44Updated last year
• SouthAsh1 / A4T-AFC
  ☆41Updated this week
• Gi7mo / TridentSkirtLights
  ☆16Updated 7 months ago
• majarspeed / Misc-Voron
  Small but useful mods
  ☆40Updated last year
• juliusjj25 / z-umbilical_mod
  Voron 2.4 z-umbilical mod
  ☆14Updated last year
• sporkus / smol_mantis
  ☆50Updated 2 years ago
• Demitryk / Voron2.4-Mods
  My personal Voron2.4 Mods
  ☆51Updated 3 years ago
• 3DAixperts / skirt-button-pcb
  ☆43Updated last year
• WINTFOX00 / TRIDENT-STEPPER-DECOUPLER
  ☆54Updated last year
• MapleLeafMakers / VoronConstruct360
  ☆37Updated last year
• rxndss / Bureau-Printhead
  Printhead for MGN12
  ☆33Updated last year
• CoconutDevelopment / CocobustorZero
  An small upgrade for the Voron 0.2 to make it print slightly faster
  ☆40Updated last year
• hammered-github / Stealthburner-LGX-Lite-SB2040
  Stealthburner with LGX Lite and SB2040
  ☆28Updated 2 years ago
• jrlomas / Sherpa-Zero
  Sherpa Zero: Voron Issue #6, Prusa3d Issue #602 Mitigator
  ☆72Updated 2 years ago