Manawyrm / ISASTMLinks
STM32-based ISA-over-USB-adapter
☆121Updated 4 years ago
Alternatives and similar repositories for ISASTM
Users that are interested in ISASTM are comparing it to the libraries listed below
Sorting:
- MFM emulator code☆57Updated last week
- Raspberry Pi to ISA bus, including Adlib emulation and PCB (KiCad)☆44Updated last year
- This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.☆54Updated 5 months ago
- PCChips M396F V2.7 Replika☆80Updated 11 months ago
- RTL8019-based ISA network card, NE2000-compatible☆113Updated 4 years ago
- USB keyboard to PS/2 / AT / XT interface converter using a Raspberry Pi Pico☆139Updated last month
- Open Programming Firmware for the TL866A Programmer.☆134Updated 2 years ago
- Open-source 486 ATX Motherboard☆69Updated 2 years ago
- ☆128Updated last year
- ☆80Updated 4 years ago
- ☆27Updated 4 years ago
- IBM PC/Clone 8086+ floppy-loading of option roms.☆68Updated 3 years ago
- Tutorial on the IBM Micro Channel bus architecture☆37Updated 3 years ago
- Emulate ROM chips with a Raspberry Pi Pico.☆118Updated 3 years ago
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆65Updated 6 years ago
- GIT Repo for the ATX2AT Smart Converter☆67Updated 3 years ago
- A new ATX design of an XT compatible PC mainboard☆56Updated 7 months ago
- PS/2 to serial port mouse adapter☆83Updated 11 months ago
- ISA 8-Bit Ethernet Controller☆121Updated 8 months ago
- Device firmware for accessing a floppy drive at the raw flux level☆64Updated 6 months ago
- Drop-In replacement for Dallas DS12887 RTC module☆47Updated 3 years ago
- Adding ISA slots to modern motherboards☆201Updated 4 months ago
- XT-IDE 8-Bit IDE Controller☆109Updated 7 months ago
- A microprocessed RGB to HDMI Converter with USB capture☆101Updated last year
- A 16MB 30 pin SIMM☆43Updated 2 years ago
- ☆57Updated 4 years ago
- Adapts standard PC floppy drives for use with IBM PS/2 computers that have 40 pin edge connectors☆34Updated 4 years ago
- ☆52Updated 4 years ago
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆49Updated 4 months ago
- Build a retro ISA or PC / 104 slot-based system on an ITX format board☆33Updated 4 years ago