Krakenpine / krakenpine-synthingLinks
Synth modules?
☆20Updated 6 months ago
Alternatives and similar repositories for krakenpine-synthing
Users that are interested in krakenpine-synthing are comparing it to the libraries listed below
Sorting:
- Eurorack format Quantizer with Arduino Nano☆43Updated 3 years ago
- OTA VC Filter Module in Eurorack Format☆14Updated 2 years ago
- Published Modules of the Sluisbrinkie project☆25Updated this week
- 6CH Eurorack trigger sequencer and euclidean Rhythm Generator with SSD1306 0.96 OLED☆40Updated 3 months ago
- A multi-stage phase shifter in Eurorack format with up to 12 stages selectable☆23Updated last month
- 4hp DIY eurorack line and headphone output module based on the Nearness and AJH headphone amp modules☆25Updated 3 years ago
- Eurorack voltage processor / ring modulator inspired by the Buchla 257.☆15Updated last year
- Eurorack modules☆36Updated 10 years ago
- Modular analog electro acoustic noise machine.☆31Updated last year
- Kocmoc Free Open Source Hardware for Eurorack☆13Updated 3 years ago
- A dual oscillator project☆27Updated 4 years ago
- EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico☆18Updated 9 months ago
- MS20-VCF clone based on BartonSynth version.☆20Updated 7 months ago
- A through-hole reverb module for Eurorack based around the Daisy Seed by Electrosmith☆20Updated last year
- Front panel for Braids eurorack module☆13Updated 4 years ago
- A quad function generator project☆22Updated 4 years ago
- Arduino Nano version of Mutable Instruments Grids☆39Updated 2 years ago
- A Eurorack DCO module based on the DCO core of the Roland Juno 106☆25Updated 2 years ago
- Alternate firmware and scripts for Sync LFO & A-RYTH-MATIK eurorack modules.☆19Updated 3 months ago
- An 8HP eurorack multimode filter module based on the Bastl Cinnamon☆38Updated 3 years ago
- Arduino based Clock Divider☆18Updated 4 months ago
- Eurorack conversion kit for Wave2 - Dual channel oscilloscope☆15Updated 5 years ago
- QUATRO is a quad VCA and mixer based on Veils, by Mutable Instruments. Original design by Émilie Gillet - CC BY-SA 3.0. Through-hole remi…☆22Updated 3 years ago
- Clock divider module based on Arduino Nano, compatible with Eurorack and Kosmo modular synthesizers.☆37Updated last year
- 4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.☆49Updated 3 months ago
- A clock module for Eurorack systems☆24Updated 6 years ago
- DOTS eurorack module pcb schematics and code ATMega328 based☆21Updated 7 months ago
- ☆18Updated 4 years ago
- Arduino based DCO☆25Updated 3 years ago
- Random CV Sequencer Eurorack Module, based on the design from Music Thing Modular.☆14Updated 3 months ago