Alternatives and similar repositories for pico-sexa-uart-bridge

Users that are interested in pico-sexa-uart-bridge are comparing it to the libraries listed below

• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆112Updated last year
• dwillmore / TSSOP20_breakout
  A generic breakout board for TSSOP20 chips to a SIP header meant for breadboard use
  ☆15Updated last year
• BleakyTex / geiger_pen
  ☆29Updated 2 years ago
• dobrishinov / PowerLinkESP
  Enhancing Nice-Power Bench Power Supplies with ESP8266 Connectivity
  ☆67Updated 10 months ago
• atc1441 / ATC_stc_solder_iron
  Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based
  ☆50Updated 2 years ago
• harrywalsh / pico-hw_and_pio-uart-gridge
  ☆31Updated 4 years ago
• rallekralle11 / Epi_4L
  4 layer version of the Epi 32U4
  ☆58Updated 2 years ago
• wagiminator / ATtiny13-TinyRemoteXL
  12-Button IR Remote Control
  ☆45Updated 2 years ago
• knifter / DualPID
  Multi Channel Configurable PID regulator on M5Stack Core
  ☆48Updated last year
• adafruit / u2if
  USB to interfaces implementing MicroPython "machine" module functionalities on a computer.
  ☆31Updated 9 months ago
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆34Updated last year
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆59Updated 11 months ago
• wagiminator / CH552-USB-OLED
  USB controlled I²C OLED
  ☆73Updated last year
• dakhnod / ESP32-Bluetooth-USB-dongle
  Allows to use a ESP32 dev board like a regular Bluetooth dongle
  ☆106Updated last year
• Ratti3 / BQ2589x-ATMEGA32U4-Charger-Powerbank-with-SSD1306-OLED
  Texas Instruments BQ25896 driver for ATMEGA MCUs
  ☆18Updated last year
• rin67630 / Drok-Juntek-on-steroids
  Extend the possibilities of cheap digital power supplies with a WiFi module
  ☆61Updated last year
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆90Updated 4 years ago
• JosueAGtz / cistercianDisplay
  31 segments digital Cistercian Display with constant current serial to parallel driver.
  ☆23Updated 2 years ago
• mike-rankin / ESP32-C3_1.54inch_E-ink
  ESP32-C3 1.54inch E-ink Project
  ☆29Updated 2 years ago
• solderparty / rp2040_stamp_carrier_hw
  ☆18Updated 3 years ago
• solderparty / flexypin_adapters_hw
  ☆50Updated 7 months ago
• danielmader / MatrixClock_MicroPythonESP
  A simple clock for a 64x32 HUB75 LED matrix display with scheduled NTP sync and Sensirion SHT40 ambient sensor.
  ☆12Updated 11 months ago
• MangyDogUK / ReflowOven
  The source code for my reflow oven, WARNING use at your own risk. This project deals with MAINS VOLTAGES which can kill.
  ☆23Updated 5 years ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆53Updated 2 years ago
• initdc / YD-RP2040
  ☆20Updated 2 years ago
• jbentham / picofreq
  Accurate frequency measurement using a Pi Pico RP2040
  ☆40Updated last year
• solderparty / flexypin
  ☆109Updated last year
• aeonSolutions / AeonLabs-Solder-Reflow-Plate-PCB
  Solder Reflow Plate PCB
  ☆32Updated last year
• foxieproducts / cardclock
  Foxie CardClock source
  ☆34Updated last year
• akshaybaweja / component-tester-oled
  Component Tester in a Keychain
  ☆75Updated 3 years ago