IngeniousKink / LVS-GatewayLinks
ESP32 firmware that speaks Lovense BLE protocol to broadcast commands for MuSE/LoveSpouse toys.
☆27Updated 2 years ago
Alternatives and similar repositories for LVS-Gateway
Users that are interested in LVS-Gateway are comparing it to the libraries listed below
Sorting:
- Arduino/ESP32 bluetooth controlled toy using buttplug/intiface☆11Updated last year
- Moddings for Proxmark3☆34Updated last year
- Wireless tool to communicate with IR based ESLs from a smartphone ;-)☆68Updated last year
- With this tool, you can register entries of the CC1101 during operation read and change. You can switch to send or receive. Set the trans…☆48Updated 4 years ago
- Using ESP32-S2 as a USB Disk with Wireless accessibility. HTTP file server be used with both upload and download capability.☆80Updated 3 years ago
- ESPboy RFID-NFC module for read/write/store/emulate RFID and NFC tags☆26Updated 2 years ago
- The C-based Firmware Patching Framework for Broadcom/Cypress WiFi Chips that enables Monitor Mode, Frame Injection and much more☆27Updated last year
- ☆166Updated last year
- Arduino library for interfacing with CC1101 transceivers.☆193Updated 5 years ago
- Scan 2.4Ghz Band with nRF24L01☆72Updated 3 years ago
- Custom implementation of a T-Code protocol for connection to Intiface software for Flipper Zero devices☆33Updated last year
- NewRemoteSwitch library v1.2.0 (20140128) for Arduino 1.0 Made by Randy Simons http://randysimons.nl/☆51Updated 4 years ago
- A NOT FINISHED Flipper Zero Clone created from the open src schematic and the open src firmware☆87Updated last year
- Arduino and PlatformIO IDE compatible TFT library optimised for the Raspberry Pi Pico (RP2040), STM32, ESP8266 and ESP32 that supports di…☆16Updated last year
- A guide for setting up flashing your ESP projects directly from your browser☆124Updated 3 years ago
- Get RF frequencies that are above the set threshold by hopping through a list of commonly used frequencies☆10Updated 2 years ago
- Sending and receiving Simu: Radio motor Hz / Hz02 / EHz / Door control RSA / Radio receiver SA Hz / Garage door operator GM800 / GM1000 M…☆49Updated 4 years ago
- Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably…☆53Updated 11 months ago
- The ESL project of furrtek, with board, apk and hex files☆14Updated 6 years ago
- SX1278 and ESP32 based POCSAG receiver☆18Updated 10 months ago
- Using ArduinoBLE to control Lovense devices.☆16Updated 3 years ago
- ESP32-S2 and CC1101S 433Mhz usb stick to record and send car gates/garages data keys and open stuff☆18Updated 4 years ago
- ESPTool but online☆122Updated 6 months ago
- This is simple half duplex radio communication device built with CC1101 module and Arduino Pro Micro (3.3V / 8MHz) using SmartRC library☆20Updated 3 years ago
- Estim box plans. Use at own risk.☆94Updated 3 years ago
- Simply turn your power bank into a cool power supply☆12Updated 5 years ago
- Hardware files for April Brother☆21Updated 11 months ago
- Minimal USB-DFU for Miniware products with OLED driver support☆47Updated 6 months ago
- This project aims to develop a CAN (Controller Area Network) adapter for the Flipper Zero, allowing users to connect devices with a CAN i…☆44Updated 11 months ago
- cydOS is just another ESP32-2432S028R launcher....☆26Updated 6 months ago