IndoorCorgi / picoboot3Links
Custom bootloader that allows firmware updates to Raspberry Pi Pico via UART/I2C/SPI.
☆23Updated 2 months ago
Alternatives and similar repositories for picoboot3
Users that are interested in picoboot3 are comparing it to the libraries listed below
Sorting:
- Pio UART receiver with DMA buffer (optional) for the RP2040☆14Updated 10 months ago
- A pio program to capture signal edges on any pins of the RP2040☆16Updated 10 months ago
- Music generation on RP2040 with CMSIS-Stream, CMSIS-DSP and Arm-2D☆17Updated last year
- ☆22Updated last month
- USB-C 1-60V Current and Voltage Controlled Power Supply☆18Updated 3 years ago
- An open-source DAPLink Arduino Library supports Keil MDK, IAR Embedded Workbench, OpenOCD, and other commonly used IDE.☆36Updated 5 months ago
- Baremetal LVGL demo on Lichee Nano☆20Updated 4 years ago
- Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L …☆25Updated last year
- ESC(Electronic Speed Controller) source code based on RISC-V CH32☆37Updated last year
- Firmware for the PicoAWG Wave Generator☆23Updated last year
- CMSIS-DAP compliant SWD Programmer☆24Updated last year
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 4 years ago
- The Following C Coded Library is used to perform Flash Write, Read and Erase functions on Raspberry Pico 2040.☆30Updated 3 years ago
- MicroPython for WCH CH32V307☆37Updated 2 years ago
- CM4 compatible MCU board☆32Updated 11 months ago
- Go bindings for the libjaylink library.☆8Updated 2 years ago
- Command-line access to F1C100s GPIO☆24Updated 5 years ago
- Solar powered noise measuring business card☆21Updated 11 months ago
- A minimum development board for CH32V203G6.☆44Updated 2 years ago
- L1 R1 S1: PuyaSemi 24MHz Cortex-M0 MCU (PY32F002A/PY32F003/PY32F030)☆25Updated 2 years ago
- a daplink made of pi-pico☆30Updated 3 years ago
- An MDK template for Raspberry Pi Pico + LVGL☆31Updated 2 years ago
- STM32H7B0VBT6 Core Board 280Mhz,128KB ROM,1.4M SRAM☆17Updated 2 years ago
- Development board for ESP32-P4 Dual core RISCV processor from Espressif☆29Updated 2 weeks ago
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆34Updated 3 weeks ago
- OpenOCD port running on ESP32-S3 microcontrollers☆76Updated 2 months ago
- An example to show how to use dual CDC VCP USB interfaces.☆9Updated 4 years ago
- ☆47Updated last month
- PlatformIO platform and framework for Artery AT32 MCU☆24Updated last month
- A tiny FPGA core module based on GW1NZ-LV1, CH552 and SLG46580☆24Updated 3 years ago