Alternatives and similar repositories for diycamera

Users that are interested in diycamera are comparing it to the libraries listed below

• upnalab / SonicSurface
  Generating Airborne Ultrasonic Amplitude Patterns Using an Open Hardware Phased Array
  ☆169Updated 2 months ago
• IdleHandsProject / volumetric_display
  TENEX OLED Displays
  ☆297Updated 10 months ago
• benkrasnow / DSKY_EL_replica
  Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display
  ☆245Updated 4 years ago
• benkrasnow / MultiSpectLED
  Array of 15 1W LEDs spanning 280nm to 940nm
  ☆102Updated 5 months ago
• bitluni / SonarScannerV1
  ☆104Updated 3 years ago
• apertus-open-source-cinema / axiom-firmware
  AXIOM firmware (linux image, gateware and software tools)
  ☆183Updated 8 months ago
• orangecrab-fpga / orangecrab-hardware
  ECP5 breakout board in a feather physical format
  ☆499Updated 6 months ago
• will127534 / FourThirdsEye
  Open source Raspberry Pi 5 compatible Micro Four Thirds camera module based on IMX294
  ☆221Updated last month
• AncientJames / uGrey
  Micropython native module to display greyscale on a monochrome oled.
  ☆163Updated 2 years ago
• lucysrausch / pcbtc
  PCB based Dual Resonance Solid State Tesla Coil Design
  ☆213Updated 2 years ago
• astuder / epc901
  Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.
  ☆53Updated 2 years ago
• microbotsio / MotorCell
  A tiny, thin, high-speed PCB motor with an onboard sensorless controller
  ☆113Updated 2 weeks ago
• groupgets / kimchi-micro
  An open hardware embedded SBC for the NXP i.MX8M Mini application processor
  ☆123Updated 2 weeks ago
• cnlohr / ch32v003_3digit_lcd_usb
  ch32v003 USB Driver for 3-digit 7-segment TN LCDs with touch
  ☆164Updated 4 months ago
• Jana-Marie / EF-S-Adapter
  Hard- and Firmware to control different EF and EF-S lenses
  ☆122Updated last month
• benkrasnow / EL_driver_multi
  Schematic, PCB, and firmware to build a multi-channel electroluminescent driver
  ☆97Updated 6 years ago
• will127534 / StarlightEye
  A IMX585 camera board designed for Raspberry Pi
  ☆161Updated 7 months ago
• mkvenkit / mico
  Open Source PDM to USB microphone based on the Raspberry PI RP2040.
  ☆201Updated 3 years ago
• CarlBugeja / PCB-Hot-Plate
  Reflowing PCBs with PCBs!
  ☆88Updated 3 years ago
• free-pdk / easy-pdk-programmer-hardware
  Easy PDK programmer for PADAUK microcontroller. EDA, schematic, gerber, bom, housing stl, firmware
  ☆184Updated last year
• PaulKlinger / cnn_card
  Business card running / showing the internals of a CNN to classify 5x5 digits
  ☆93Updated 4 years ago
• Pinuct / Eagle_PCB_USB_connectors
  Eagle library for USB connectors directly on PCB
  ☆137Updated 7 years ago
• pms67 / STRF-Kicad
  STM32-based RF-to-USB dongle..
  ☆204Updated 2 years ago
• mfolejewski / FEMTO
  FEMTO - RP2040 12x12mm PCB module
  ☆145Updated 2 years ago
• sparkfun / Graphical_Datasheets
  Code, final versions, and information on the SparkFun Graphical Datasheets
  ☆139Updated 5 months ago
• drandyhaas / Haasoscope
  Docs, design, firmware, and software for the Haasoscope
  ☆132Updated 11 months ago
• bitluni / LaserCRT
  ☆69Updated 5 months ago
• Spirit532 / studio_mic
  A simple, easy to build preamplifier for any true condenser capsule, to make a condenser microphone
  ☆134Updated 2 years ago
• PCB-Arts / stylized-blender-setup
  Stylized render setup for use with the cycles render engine in Blender
  ☆136Updated 2 years ago
• scottbez1 / SwitchOrnamentReference
  Reference code for my homemade Nintendo Switch ornament
  ☆98Updated 3 years ago