Alternatives and similar repositories for ISS-PCB:

Users that are interested in ISS-PCB are comparing it to the libraries listed below

• rigexpert / gr-rigexpert
  Fobos SDR receiver Complex IQ signal source block for GnuRadio. Full sourse code.
  ☆27Updated 8 months ago
• embedinn / iotSDR
  GitHub Repository for iotSDR open source material
  ☆34Updated last year
• Blue-Smoke-Electronics / Ember
  ☆16Updated 9 months ago
• szigix / YATPGPSDO
  Yet Another TruePosition GPSDO
  ☆15Updated 2 years ago
• ketszim97 / OpenScope_DigitalTest
  Digital Test board for an Open Source FPGA Oscilloscope
  ☆17Updated 4 years ago
• EnhancedRadioDevices / RF-Power-Meter
  ☆17Updated 7 years ago
• PetteriAimonen / relaymux
  Hardware and firmware for a USB connected relay box
  ☆13Updated last year
• circuitvalley / LM399_Voltage_reference
  Simple LM399 Voltage Reference board
  ☆21Updated 2 months ago
• embeddedalpha / PCB-Design
  Repository for PCB Design Projects
  ☆34Updated 3 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆29Updated 2 years ago
• CGrassin / biosignals
  Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).
  ☆10Updated 2 years ago
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated 11 months ago
• Mantvis97 / OS-001-KiCAD_DBLibrary_Example
  An example of KiCAD Database Library
  ☆10Updated 5 months ago
• open-thngs / so-dimm-esp32-cm
  SO-DIMM ESP32 CM
  ☆9Updated 5 months ago
• 5inf / TestPointReport2STL
  This is an OpenSCAD script to convert a csv file containing a PCB test point report - generated e.g. from Altium Designer, KiCAD, Eagle o…
  ☆11Updated 4 years ago
• Steffen-W / KiCad-Parasitics
  KiCad plugin to determine the parasitic properties of the printed tracks in the PCB layout.
  ☆35Updated last week
• thingsat / tinygs_2g4station
  HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/
  ☆27Updated this week
• bertrik / hlk-ld2410
  Protocol implementation for HLK-LD2410 radar module
  ☆21Updated 2 years ago
• myriadrf / component-libraries
  EDA component libraries
  ☆19Updated 7 years ago
• Aylo6061 / PDHV
  ☆33Updated 2 years ago
• cellularmitosis / app-notes
  Links to application notes published by electronics manufacturers.
  ☆43Updated 6 years ago
• pms67 / BananaSchplit-MiniUSBC
  Tiny USB-C PD split-rail power supply.
  ☆23Updated 2 years ago
• tobozo / M5Rotatey_Cube
  🧊 Modified M5Stack/MPU9250 gyro/accel demo sketch
  ☆12Updated 4 years ago
• judge2005 / HVPS_SMD
  A small, flexible nixie clock tube power supply.
  ☆11Updated 10 months ago
• CGrassin / kicad-pinout-generator
  This KiCad plugin generates pinouts from the PCB file to various formats.
  ☆37Updated 9 months ago
• qwertpas / SerpentSerialTool
  App to display and plot serial data
  ☆12Updated last month
• OpenLST / openlst-hw
  ☆31Updated 3 years ago
• owntech-foundation / SPIN
  Repository holding all Kicad file for the SPIN board
  ☆9Updated 2 months ago
• CGrassin / rf_network_analyzer
  A $50 DIY RF network analyzer with tracking generator and RTL-SDRs.
  ☆17Updated 4 years ago
• MR-DOS / MWGEN-G1
  12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
  ☆15Updated 3 years ago