Alternatives and similar repositories for HippoADK:

Users that are interested in HippoADK are comparing it to the libraries listed below

• DexterInd / ArduBerry
  Arduberry is the easiest adapter for Raspberry Pi and Arduino
  ☆41Updated 6 years ago
• raspberrypilearning / teachers-classroom-guide
  [NOT MAINTAINED] A guide for using Raspberry Pi in the classroom.
  ☆11Updated 7 years ago
• LaosLaser / Hardware
  Hardware (Mainboard PCB designs etc.)
  ☆17Updated 9 years ago
• OSHChip / OSHChip_V1.0_Docs
  Schematics, Gerbers, Bill of materials
  ☆33Updated 9 years ago
• rayshobby / squarewear
  SquareWear is an open-source wearable electronics controller board. This repository contains the hardware design files, software library,…
  ☆36Updated 8 years ago
• adafruit / adafruit-rpi-fbtft
  Fork of FBTFT for use with Adafruit TS shield
  ☆38Updated 9 years ago
• IRNAS / ToslinkCNC
  CNC machine control modules with Toslink optical cables
  ☆26Updated 7 years ago
• hallard / arduipi
  ArduiPi is a shield for Raspberry Pi that brings Arduino low level extented I/O to Raspberry Pi
  ☆24Updated 10 years ago
• subpos / subpos_node
  ☆24Updated 8 years ago
• electronut / attiny10-rgb-hello
  Getting started with the Atmel ATtiny10.
  ☆10Updated 8 years ago
• airboxlab / Firmware
  Firmware for Open-source Indoor Air Quality Monitor
  ☆15Updated 9 years ago
• subpos / esp_firmware
  ☆12Updated 8 years ago
• kanflo / espism
  A low cost ISM radio to wifi gateway
  ☆41Updated 5 years ago
• erainstruments / erasynth-micro-docs
  ERASynth Micro Documentation
  ☆15Updated 5 years ago
• miniBloq / v0.83
  miniBloq.v0.83
  ☆87Updated 4 months ago
• rayshobby / RFToy
  Arduino library and example code for RFToy -- an Arduino-compatible gadget for RF modules. Check http://rftoy.rayshobby.net.
  ☆32Updated 10 years ago
• adafruit / Adafruit_ProTrinket_Bootloader
  ☆25Updated 10 years ago
• subpos / esp_wifi_scanner
  ☆21Updated 8 years ago
• chilipeppr / tinyg
  The tracking location for tickets for the chilipeppr.com/tinyg workspace.
  ☆28Updated 9 years ago
• Integreight / 1Sheeld-Schematics-and-Board
  This repository contains the schematics, board and Fritzing part files for the 1Sheeld board.
  ☆42Updated 8 years ago
• floe / RF24
  Arduino driver for nRF24L01
  ☆25Updated 10 years ago
• vanceb / NightClock
  An ESP8266 based clock intended for the bedroom. It uses neopixels to light one of 12 segments giving the hour and approximate minutes, …
  ☆19Updated 7 years ago
• orionmsx / OttoCalTool
  Otto's Calibration Tool
  ☆12Updated last year
• reprap / electronics
  RepRap Electronics
  ☆25Updated 13 years ago
• MickMad / HACK
  HackAday Cortex Kit
  ☆19Updated 8 years ago
• sparkfun / Micro_OLED_Breakout
  Breakout board for a monochrome, 0.66", 64x48 OLED display.
  ☆28Updated 5 years ago
• richard-sim / openpnp-linear-rails
  An OpenPnP compatible SMT pick and place machine with linear rails based on Anthony Webb's build on hackaday.io.
  ☆13Updated 8 years ago
• biosafetylvl5 / retr3d
  Building 3D Printers from E-Waste
  ☆24Updated 9 years ago