Flamingo-tech / Open_DucoLinks
Opensource firmware and hardware for Duco Ventilation Boxes
☆19Updated 2 years ago
Alternatives and similar repositories for Open_Duco
Users that are interested in Open_Duco are comparing it to the libraries listed below
Sorting:
- Sonoff NSPanel protocol and hacking information. Tasmota Berry driver for NSPanel☆136Updated 11 months ago
- Somfy ESP8266 Remote 433.24 RTS☆45Updated 6 years ago
- ☆91Updated 2 years ago
- Interfaccia Termostato integrata con HomeAssistant tramite Mqtt con ESP32-C3 e display 1.3inc con bottone ed encoder☆25Updated 3 weeks ago
- A smartmeter project, made for ESPHome (hardware + ESPHome config)☆80Updated 9 months ago
- ☆13Updated last month
- ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter☆105Updated last year
- Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.☆295Updated 2 weeks ago
- ESPHome based DoorBell☆68Updated 4 months ago
- Measurement of water consumption directly from your water meter with a TCRT5000 like sensor and ESPHome.☆73Updated 7 months ago
- Home assistant Integration for the OpenEPaperLink project☆243Updated last month
- ☆63Updated 2 years ago
- ESPhome on my Sonoff NS Panel☆38Updated 3 years ago
- A remote display showing Home Assistant data on a 2.9 inch e-ink epaper display☆54Updated 2 years ago
- Hassio Addon packaging modus-proxy☆55Updated last year
- esphome configuration to read pool sensor data☆10Updated last year
- Software for the ESP8266 that sends P1 smart meter data to MQTT (without CRC checking)☆22Updated 7 years ago
- Multinotify service for Home Assistant☆60Updated 4 months ago
- ESPHome custom firmware for the ZB-GW03 zigbee gateway☆87Updated this week
- Takes real time stream from Enphase Envoy and publishes to mqtt broker☆69Updated 7 months ago
- OpenEVSE Integration for Home Assistant☆79Updated last week
- The Smart Autotune Thermostat (SAT) is a custom component for Home Assistant that works with many compatible gateways for your boiler.☆123Updated 5 months ago
- ESPHome configuration example to create an animated clock using the Neopixel 60 LED ring☆36Updated 2 months ago
- Python connector and ESPHome template for Bluetooth based Battery Monitors - reverse engineering.☆73Updated 9 months ago
- A Fronius Sensor for Home Assistant☆82Updated 2 years ago
- Shelly Scanner source code☆39Updated this week
- THIS REPO IS OUTDATED! Please use official ESPHome - it supports LibreTiny natively.☆90Updated last month
- ESPHome configuration for a DIY indoor air quality monitor for CO₂ concentration, PM2.5 and PM10 concentrations, and temperature, humidit…☆104Updated last year
- Custom component reading AMS through MBus adapter into HomeAssistant☆47Updated last month
- Utility to map between Blue Riiots pool API, and Home Assistant MQTT☆50Updated last year