ElectronicCats / CatWAN_USB_StickLinks
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
☆45Updated 5 months ago
Alternatives and similar repositories for CatWAN_USB_Stick
Users that are interested in CatWAN_USB_Stick are comparing it to the libraries listed below
Sorting:
- An Open Source software for connect, review and analyze packages of LoRa®, we recommend using with catWAN USB Stick☆22Updated 2 years ago
- HUB repository for all the Catsniffer Tools available maintaned by Electronic Cats☆30Updated last week
- Yet another Multipurpose Breakout Board to hack hardware in a clean and easy way☆31Updated 2 years ago
- Utilities for sniffing bluetooth low-energy (BLE) packets using a CC2540 USB sniffer dongle☆29Updated 5 years ago
- Open source PCB the size of a credit card that is capable of detecting the field generated by a RFID reader and identify if it is a LF(12…☆75Updated 7 years ago
- driver library for Ti CC1100 / CC1101. For Arduino and Raspberry Pi☆23Updated 7 years ago
- ProxmarkIII mods and designs made for the wild☆13Updated 9 years ago
- USB bootloader for the CC1111 RF SoC (rfcat version)☆33Updated 2 years ago
- 🐝 Zigbee security research toolkit for the RaspBee, nRF52840 and CC2531 radio modules.☆30Updated 5 years ago
- Detect jamming on ISM bands using an RTLSDR dongle and a Raspberry Pi or laptop PC☆35Updated 8 years ago
- Learn to do something new with GreatFET!☆66Updated last year
- Universal Radio Hacker (urh) plugin to decode cc1101 messages, which uses the cc1101 FEC (forward error correction) feature☆38Updated 8 years ago
- Z-Attack - Z-Wave packet interception and injection tool (with GUI improvement)☆28Updated 10 years ago
- Soundcard RFID decoder for 125KHZ HID cards.☆27Updated 9 years ago
- Killerbee compatible ZigBee sniffer/injector firmware for TI CC2531 USB dongles☆50Updated 4 years ago
- Allows you to use an Arduino to capture LoRa radio network traffic and transfer to a PC for viewing or saving to disk.☆64Updated 8 years ago
- HUB repository for all the Catsniffer Firmware code available maintaned by Electronic Cats☆23Updated 3 weeks ago
- Python 3 bindings for interfacing with LoRa nodes.☆21Updated 5 years ago
- MASLOW: an Open WiFi Detector with ESP8266☆22Updated 9 years ago
- Driving one of those cheap RF1101SE boards with a Arduino or Teensy☆62Updated 8 years ago
- Command line interface client to RFQuack dongles☆10Updated 3 years ago
- Android application allowing to sniff and inject Zigbee, Mosart and Enhanced ShockBurst packets on a Samsung Galaxy S20☆67Updated 4 years ago
- This repository contains a set of InternalBlue patches for the BCM4375B1 Bluetooth controller, allowing to sniff and inject Zigbee, Mosar…☆23Updated 4 years ago
- Hardware designs for CC11xx☆101Updated 4 years ago
- A tool that can read the commands off an NFC reader using an RTL-SDR☆40Updated 7 years ago
- Python Flask Web Interface for proxmark3 RDV4 hardware.☆29Updated 3 years ago
- Artifacts for the paper "ESPwn32: Hacking with ESP32 System-on-Chips" (WOOT 2023).☆16Updated 2 years ago
- Integrating some Major Malfunction tools for Mag-stripe info☆55Updated 8 years ago
- ☆49Updated 9 years ago
- Implement Samy's magspoof on Arduino Nano☆18Updated 9 years ago