Ebiroll / esp32_flash_loader
Ghidra Loader for ESP32 Flash Dumps
☆12Updated 2 months ago
Alternatives and similar repositories for esp32_flash_loader:
Users that are interested in esp32_flash_loader are comparing it to the libraries listed below
- Ghidra Loader for ESP32 Flash Dumps☆21Updated 3 months ago
- Test Interface for Multiple Embedded Protocols☆23Updated 4 years ago
- Hydrabus Shield for LIN and CAN Buses☆34Updated 2 years ago
- CRC Tool Kit☆18Updated 12 years ago
- the most basic introduction to performing a Vcc glitch attack☆26Updated 7 years ago
- This is the code for the fault injection tutorial I wrote. Read the README for more information.☆13Updated 11 years ago
- Various projects aiming at unlocking and programming the MINI54ZAN microcontroller☆18Updated 4 years ago
- Hardware design files for the PMOD based MUX☆13Updated 5 years ago
- Raspberry Pi Pico voltage glitcher.☆28Updated 2 years ago
- ☆13Updated 8 years ago
- ChipJabber-Unplugged does new-school attacks with old-school logic.☆12Updated 4 years ago
- 8Bit Nand universal reader for FTDI FT2323H Breakout Board, based on basic code from http://spritesmods.com/?art=ftdinand☆22Updated 10 years ago
- FPGA glitcher based on toothlessco's arty-glitcher, but for the icebreaker☆17Updated 5 years ago
- RFCat scripts to dump HCS keeloq encoder data☆13Updated 8 years ago
- Implementation of the ARM SWD (Serial Wire Debug) protocol in Python for use with low-cost development boards to manage and flash Cortex …☆33Updated 10 years ago
- DJI has modified the GPL Busybox ftpd on Mavic, Spark, & Inspire 2 to include AES scrambling of downloaded files...☆17Updated 7 years ago
- A loader and analyzer for ESP8266 firmware☆14Updated 11 months ago
- The Micro Python project (adding HydraBus Port)☆8Updated 3 years ago
- ☆10Updated 7 years ago
- Convert a raw firmware image to an ELF file.☆14Updated 6 years ago
- ESP32 projects☆29Updated 6 years ago
- Renesas RX processor module for Ghidra☆33Updated 3 years ago
- Documentation for the CANtact devices☆31Updated 3 years ago
- CANoolder: CAN to 3.3V logic level interface. Dumb. Cheap. Simple. Pick 3.☆13Updated 7 years ago
- carrier board for using the seeduino xiao (or xiaorp2040, adfruit qt py, qt py 2040) for jtagulating and implanting☆26Updated 4 months ago
- Outdated. See https://github.com/saleae/jtag-analyzer for the official Saleae JTAG Analyzer☆12Updated 6 years ago
- Software for Xmega-A1 Xplained board with MAX4619 glitch circuit☆40Updated 8 years ago
- Minimal UART client in Golang that dumps LPC1343 chips that are locked at CRP1.☆20Updated 4 years ago
- RTL-SDR 433MHz signal recovery with MATLAB☆10Updated 10 years ago
- ☆12Updated 7 years ago