DuPAL-PAL-DUmper / DuPAL_AnalyzerLinks
This a Java tool that interfaces to the DuPAL board via serial connection. It performs analysis that would be problematic to implement on a MCU.
☆24Updated last year
Alternatives and similar repositories for DuPAL_Analyzer
Users that are interested in DuPAL_Analyzer are comparing it to the libraries listed below
Sorting:
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆51Updated 5 months ago
- Firmware for the DuPAL board.☆13Updated 4 years ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 8 years ago
- This project aims at reading the ROM content out of a mask programmed MC6801 uP.☆20Updated 2 years ago
- A set of scripts used to assist reverse engineering of old-school Programmable Array Logic devices.☆73Updated 5 years ago
- Graphical tool to aid in the analysis of Programmable Array Logic (PAL) devices.☆11Updated last year
- MFM emulator code☆57Updated last month
- An FPGA-based disk controller card for the Apple II☆46Updated 6 years ago
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆65Updated 6 years ago
- Apple II VGA PCB☆14Updated 2 years ago
- Drop-In replacement for Dallas DS12887 RTC module☆48Updated 3 years ago
- Design Flow for Atmel/Microchip ATF15xx CPLDs using Yosys and the Atmel Fitter☆29Updated 4 months ago
- a 2022 replica of the classic TI/994a, using obtainable parts☆39Updated 10 months ago
- 4 MB and 16 MB 30-pin DRAM SIMMs☆24Updated last year
- FPGA board to create a component video signal for vintage computers.☆67Updated 5 months ago
- The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics☆51Updated last year
- Analog RGB 15Khz to VGA 31Khz in FGPA☆48Updated 9 years ago
- PCXT by spark2k06 deMiSTified☆20Updated last year
- Stuff to put a FPGA in a SBus system (SPARCstation)☆49Updated last year
- Simple tool for testing and repairing floppy drives☆24Updated 3 months ago
- A voltage adapter PCB for 486 CPUs☆44Updated 2 years ago
- PCMCIA SRAM card project (Sakura)☆44Updated 6 years ago
- Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.☆43Updated 2 years ago
- ATF1504-FT232HQ Shield☆16Updated 4 years ago
- Stuff to put a FPGA in a NuBus Macintosh☆52Updated last year
- PAL brute forcing using closed loop feedback w/ open-tl866☆24Updated 3 years ago
- Library of additional parts for KiCad for use with Sakura-IT projects☆24Updated last year
- ☆81Updated last year
- ZuluSCSI.com website☆9Updated last month
- ☆81Updated 4 years ago