Daandreev / LongboardMarkIILinks
Ground up, over-engineered electric longboard
☆23Updated 7 years ago
Alternatives and similar repositories for LongboardMarkII
Users that are interested in LongboardMarkII are comparing it to the libraries listed below
Sorting:
- Arducorder Mini☆128Updated 10 years ago
- ☆53Updated 7 years ago
- snippets that were too small for their own library☆37Updated 6 years ago
- This repository includes the code for my RGB Time Fountain project. Video of the project available at: https://youtu.be/LqMFiVkvxQw☆62Updated 7 years ago
- A custom 4x4 keyboard plus two rotary encoders☆115Updated 5 years ago
- A compact USB hub for the Raspberry Pi Zero☆98Updated 8 years ago
- upload dos arquivos do Fritzen Proto, um compatível com Arduino UNO para protoboard☆11Updated 9 years ago
- A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.☆75Updated 6 years ago
- A low cost ISM radio to wifi gateway☆41Updated 5 years ago
- Robot for PiWars competition☆13Updated 10 years ago
- An optical tracking telescope using OpenCV, Raspberry Pi, Arduino, and 3D printed parts☆46Updated 8 years ago
- servo-controlled reprap 3D printer☆98Updated 10 years ago
- Affordable and open-source LIDAR based on three VL53L0X ranging sensor.☆68Updated 7 years ago
- A small daemon that ensures connectivity for single-PCB devices such as the Raspberry Pi where you don't always have the means to setup y…☆69Updated 7 years ago
- FemtoBeacon - Atmel SAM R21 (ARM Cortex M0+, SAM D21 with built in AT86RF233)☆66Updated 5 years ago
- LiFePO4wered/USB power module open source hardware design files☆42Updated 4 months ago
- Hardware design for a 3 Phase BLDC controller☆57Updated 5 years ago
- Rocket Scream KiCad Library☆19Updated 9 years ago
- A simple Cost-of-Goods Calculator for Makers to help identify what time and costs make up a product.☆17Updated 7 years ago
- ☆53Updated 4 years ago
- Breadboard adapter for ESP-07 / ESP-12☆60Updated 8 years ago
- Hardware (Mainboard PCB designs etc.)☆18Updated 10 years ago
- Paul, a depressed robot balancing on his ball☆42Updated 8 years ago
- Open Exposer - Hardware, Slicer, Host, Firmware☆67Updated 9 years ago
- Creates a tabbed box with kerf adjustments. Set inside or outside dimensions, independent tab counts for each axis, corner option. Have a…☆62Updated 5 years ago
- ESP8266-based Quadcopter Brain☆93Updated 8 years ago
- ☆30Updated 9 years ago
- Converts an image brigthness values into PCB layers and outputs an Eagle .brd file.☆28Updated 8 years ago
- Sous-vide powered by Arduino - The SousViduino!☆70Updated 8 years ago
- PIDDYBOT is an Open Source Balancing Robot with the aim of teaching PID control.☆43Updated 7 years ago