Alternatives and similar repositories for CNC-DrawingMachine

Users that are interested in CNC-DrawingMachine are comparing it to the libraries listed below

• euphy / polargraph_server_polarshield_esp32
  PolargraphSD firmware for ESP32-based machines with Polarshield v3.x
  ☆33Updated 4 years ago
• bdring / Grbl_Pen_Servo
  Grbl CNC Controller with Pen Servo Feature
  ☆190Updated 6 years ago
• TGit-Tech / GRBL-28byj-48
  Grbl ver 1.1f.20170131 with XYZ Unipolar Stepper Support (28byj-48)
  ☆124Updated 4 years ago
• bdring / Grbl_ESP32_MPCNC_Controller
  A Grbl_ESP32CNC Controller for MPCNC
  ☆90Updated 3 years ago
• bdring / Grbl_ESP32_TMC2130_Plotter_Controller
  ☆66Updated 5 years ago
• ilaro-org / grbl-polar
  Modification of grbl that provides motion in polar coordinates and other features for our graffiti machine. Grbl is open source, embedded…
  ☆44Updated 7 years ago
• gerritv / Grbl-Panel
  A control panel for Grbl
  ☆184Updated 6 years ago
• arnabdasbwn / grbl-coreXY-servo
  grbl 0.9i with Servo Motor support and CoreXY configuration Used For Crazy Engineer's Drawing Robot
  ☆89Updated 6 years ago
• grbl / Universal-G-Code-Sender
  A Java based GRBL compatible cross-platform G-Code sender.
  ☆131Updated 4 years ago
• MarginallyClever / Makelangelo-software
  Software for plotters - especially the wall-hanging polargraph also called Makelangelo.
  ☆394Updated 2 weeks ago
• robottini / grbl-servo
  grbl 0.9i with Servo motor support
  ☆321Updated 3 years ago
• cguerrero1205 / LCD_GRBL
  Offline controller for CNC with GRBL 1.1
  ☆72Updated 4 years ago
• MarginallyClever / Makelangelo-firmware
  CNC firmware for many different control boards and kinematic systems. Originally the brain of the Makelangelo art robot.
  ☆164Updated 3 years ago
• dguerizec / grbl-Mega-4axis
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Me…
  ☆44Updated 8 years ago
• euphy / polargraphcontroller
  ☆172Updated 5 years ago
• cprezzi / grbl-LPC
  Multiple compiled versions for different boards & machines (under releases)
  ☆58Updated 3 years ago
• DWiskow / grbl1-1g-Servo
  modified spindle_control.c to introduce RC Servo control into grbl 1.1g
  ☆26Updated 6 years ago
• cprezzi / grbl-servo
  Special Grbl version for use with servo instead of spindle or laser.
  ☆92Updated 7 years ago
• maker101io / mXY-board-xy-plotter-drawing-machine
  ☆28Updated 5 years ago
• cncjs / CNCjs-Macros
  Macros for use with CNCjs
  ☆80Updated 3 years ago
• jpraus / wirebender
  Precise wire bending CNC machine for wires at 1mm and less in diameter.
  ☆190Updated 5 years ago
• SourceRabbit / gcode-sender
  Cross platform 3-Axis CNC Machines control software
  ☆82Updated 11 months ago
• LaserWeb / LaserWeb4-Binaries
  Installers for LaserWeb4
  ☆324Updated 3 years ago
• mstrens / grbl_controller_esp32
  grbl controller for esp32
  ☆201Updated 2 years ago
• arpruss / gcodeplot
  Use a 3-axis machine as a pen plotter
  ☆182Updated 5 months ago
• ruizivo / GRBL-28byj-48-Servo
  GRBL 0.9j to control unipolar motors (28byj-48) plus Servo motor support
  ☆231Updated 4 years ago
• positron96 / ESP32_CNC_Pendant
  A CNC Pendant on ESP32 board, with LCD, WiFi and SD card
  ☆78Updated last month
• lavolpecheprogramma / grbl-1-1h-servo
  This is a special version of grbl 1.1h version with servo support.
  ☆56Updated 4 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆81Updated last year
• RickMcConney / PenPlotter
  Polar graph controler that uses repetier firmware. Inspired by work at http://www.polargraph.co.uk
  ☆125Updated 6 years ago