Alternatives and similar repositories for Fritzing-library:

Users that are interested in Fritzing-library are comparing it to the libraries listed below

• FritzenLab / Fritzen_Proto-controller
  upload dos arquivos do Fritzen Proto, um compatível com Arduino UNO para protoboard
  ☆11Updated 8 years ago
• MakerChetan / 3D-Printing-ESP8266
  ☆43Updated 7 years ago
• adafruit / Adafruit-Feather-M0-Basic-Proto-PCB
  PCB files for the Adafruit Feather M0 Basic Proto
  ☆35Updated 2 years ago
• orionmsx / OttoCalTool
  Otto's Calibration Tool
  ☆12Updated last year
• PaulStoffregen / FlexiTimer2
  Arduino library to use timer 2 with a configurable resolution. Based on MsTimer2 by Javier Valencia. Written for the project associated w…
  ☆42Updated 2 years ago
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 4 years ago
• danasf / attiny_pixel_switch
  WS2811/12 patterns for ATtiny85 + switch!
  ☆56Updated 10 years ago
• lhartmann / esp_rtos_reprap
  Stepper motor controller based on FreeRTOS for the ESP8266.
  ☆62Updated 8 years ago
• adafruit / Standalone-Arduino-AVR-ISP-programmer
  A standalone programmer for mass-programming AVR chips
  ☆85Updated 3 years ago
• tricorderproject / arducordermini
  Arducorder Mini
  ☆127Updated 10 years ago
• PaulStoffregen / FreqMeasureMulti
  Measures the elapsed time during each cycle of up to 8 input frequencies.
  ☆35Updated 3 years ago
• adafruit / Adafruit_nRF51822_Flasher
  Wrapper for the Segger J-Link or STLink/V2 (via OpenOCD) to flash nRF51822 MCUs
  ☆42Updated 8 years ago
• notro / fbtft_tools
  ☆27Updated 7 years ago
• sparkfun / SparkFun_MicroView_Arduino_Library
  An Arduino library for the MicroView - a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics
  ☆21Updated 5 years ago
• todbot / arduino-i2c-scanner
  Simple Arduino I2C scanner as described at http://todbot.com/blog/2009/11/29/i2cscanner-pde-arduino-as-i2c-bus-scanner/
  ☆74Updated 9 years ago
• miniBloq / v0.83
  miniBloq.v0.83
  ☆86Updated 6 months ago
• sparkfun / FemtoBuck
  The FemtoBuck is a small 6-36V 350mA constant-current LED driver, with analog or PWM dimmable control options.
  ☆13Updated 2 years ago
• hoilett / Arduino-Walkie-Talkie-Instructable
  Create a simple walkie talkie using two Arduinos and two nRF24 modules
  ☆30Updated 8 years ago
• TCWORLD / ATTinyCore
  ATTiny Core for Arduino 1.0+
  ☆87Updated 7 years ago
• adafruit / Adafruit-Feather-ESP8266-HUZZAH-PCB
  PCB files for the Adafruit Feather ESP8266 HUZZAH
  ☆44Updated 4 years ago
• sparkfun / Qwiic_OpenLog
  Open source I2C based datalogger. The bigger, better cousin to the original serial OpenLog.
  ☆24Updated last year
• Miceuz / triac-bloc
  An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
  ☆50Updated 5 years ago
• CoretechR / Chronio
  Low Power Arduino Based (Smart)Watch
  ☆84Updated 8 years ago
• adafruit / Adafruit-Perma-Proto-HAT-PCB
  PCB files for the Adafruit Perma Proto HAT for Raspberry Pi PCB
  ☆29Updated 2 years ago
• marcmerlin / IoTuz
  IoTuz driver for ESP32 based LCA 2017 IoTuz board, also can be used as a demo on an espressif WROVER
  ☆30Updated 7 years ago
• CCHS-Melbourne / iotuz-esp32-hardware
  Project for the InternetOfTuz (LCA2017 Open Hardware Mini-Conference)
  ☆35Updated 7 years ago
• GravCorp / DayOLED_SSD1306
  A library for the Arduino Due, for using SSD1306 OLED screens, with DMA for high speed.
  ☆36Updated 9 years ago
• sparkfun / SAMD21_Mini_Breakout
  A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.
  ☆42Updated 2 years ago
• adafruit / TinyLiquidCrystal
  A simplified library for the Adafruit I2C/SPI backpack, for use with Gemma & Trinket
  ☆16Updated last year
• BLavery / SAMD21-M0-Mini
  Notes on using the Chinese "SAMD21-M0-Mini" board
  ☆54Updated 2 years ago