Alternatives and similar repositories for 7400-Drum-Machine

Users that are interested in 7400-Drum-Machine are comparing it to the libraries listed below

• hexagon5un / klangorium
  Hardware and tutorials for the Hackaday / Logic Noise Klangorium demo board
  ☆58Updated 10 years ago
• erwincoumans / StkDekrispatorSynthesizer
  Port of Dekrispator Synthesizer to Windows, Linux, Mac and Raspberry Pi. Original for STM32F4 is here: https://github.com/MrBlueXav/Dekri…
  ☆30Updated 4 years ago
• brianmarkpeters / CHIP_BASED_SYNTHESIZERS
  A Collection Of Chip-Based Synthesizers
  ☆136Updated 9 years ago
• hexagon5un / jan_ostmans_synths
  Synthesizers for Arduino / AVR ATMega32 from https://janostman.wordpress.com/
  ☆142Updated 4 years ago
• rppicomidi / pico-usb-midi-processor
  Use a Raspberry Pi Pico board to process USB MIDI data between a USB MIDI Keyboard or other device and a PC or other USB MIDI Host
  ☆48Updated 10 months ago
• soulsbysynths / libraries
  Soulsby Synths libraries. Goes in Arduino folder.
  ☆21Updated 7 years ago
• polykit / pico-dco
  Polyphonic Digitally Controlled Oscillator (DCO) controlled by Raspberry Pi Pico PIO
  ☆139Updated 2 years ago
• raybellis / PicoSynth
  Polyphonic wavetable synthesizer for the Raspberry Pi Pico
  ☆43Updated 3 months ago
• russellmcc / dco
  design files for cost-conscious DCO module for eurorack format modular synthesizers
  ☆30Updated 7 years ago
• 74hc595 / LPC1114-Synthesizer
  Synthesizer based on the LPC1114 ARM micro controller
  ☆58Updated 6 years ago
• TeensyAudio / Wavetable-Synthesis
  General repository for Wavetable Synthesis Capstone project at Portland State, Fall 2016 - Winter 2017
  ☆91Updated 8 years ago
• deanm1278 / Roland-K-25M
  If you want to use a Roland K-25M for a custom synth
  ☆13Updated 8 years ago
• quarterturn / squareinator
  SN76489 MIDI Monosynth
  ☆18Updated 10 years ago
• staskevich / UMR2
  Universal MIDI retrofit PCB for matrixed-switch keyboards.
  ☆44Updated 8 years ago
• noscene / zMorsOnTeensy
  zMors modular synthesizer on teensy 3.6
  ☆29Updated 8 years ago
• wee-noise-makers / WNM-PGB1-firmware
  The open-source pocket groovebox
  ☆40Updated last month
• dhaillant / kicad-3dmodels
  Home made open source STEP and VRML 3D Models for Kicad
  ☆67Updated last year
• attoparsec / Node
  KiCAD project and Arduino code for the Node module
  ☆17Updated 4 years ago
• spherical-sound-society / OPERA_ROTAS
  OPL2 Based Generative Drum Machine
  ☆40Updated 3 years ago
• TomWhitwell / Axo-Control
  ☆51Updated 5 years ago
• floretan / bontempi
  Arduino code for a revamped bontempi electronic organ
  ☆45Updated 8 years ago
• Deftaudio / Midi-boards
  MIDI projects, thru boxes, mergers, sync
  ☆118Updated last month
• diyelectromusic / picodexed
  Port of Synth_Dexed to the Raspberry Pi PIco
  ☆45Updated last month
• nyh-workshop / pico-fmSynth
  Basic DX9-inspired FM synth Arduino Library for Raspberry Pico RP2040 and RP2350.
  ☆47Updated 5 months ago
• pichenettes / avril
  AVR development library based on C++ templates.
  ☆111Updated 5 years ago
• nebs / eurocad
  A set of KiCad components and footprints I use in Eurorack modules.
  ☆125Updated 4 years ago
• clacktronics / AudioJacks
  KiCAD footprint library and 3D models for commonly used connectors used in synths and other audio equipment
  ☆100Updated 3 years ago
• enveloop / miniMO
  8-bit Programmable Synthesizer Module
  ☆73Updated 4 years ago
• h3o / Glo_v1
  firmware for Glo the Polyphonic Whale & Gecho Loopsynth v2, ESP32 based pocket synths (http://phonicbloom.com/ and http://gechologic.com/…
  ☆23Updated last year
• eudes / korg-nts1-esp32
  An attempt to build a custom panel for the `Korg NTS-1` using the ESP32 and an investigation into the inner workings of the `nts-1-custom…
  ☆46Updated 4 years ago