Alternatives and similar repositories for SigExplorer:

Users that are interested in SigExplorer are comparing it to the libraries listed below

• openxc / diagnostic-tool
  OpenXC Android Tool for Sending OBD-II Requests to a Vehicle Interface
  ☆16Updated 10 years ago
• smillier / HydraLINCAN
  Hydrabus Shield for LIN and CAN Buses
  ☆34Updated 2 years ago
• linklayer / reversegear
  Offline Reverse Engineering Tools for Automotive Networks
  ☆50Updated last year
• zombieCraig / c0f
  CAN of Fingers (c0f) creates passive fingerprints of Make and Model over CAN bus
  ☆87Updated 9 years ago
• zombieCraig / caringcaribou
  A friendly car security exploration tool
  ☆26Updated 9 years ago
• glabmoris / rfcat-hcs
  RFCat scripts to dump HCS keeloq encoder data
  ☆13Updated 8 years ago
• ericevenchick / CANtool
  A CAN bus tool
  ☆11Updated 9 years ago
• CANBus-Triple / CANBus-Triple-Wireshark
  Pipe for using the CANBus Triple with Wireshark
  ☆12Updated 9 years ago
• iDoka / raspberrypi-recipes
  Collection of practice recipes for RPi
  ☆13Updated 4 years ago
• Gutenshit / CANBadger
  CANBadger - Hardware & Firmware Repository - An open-source automotive security research platform.
  ☆63Updated 4 years ago
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆36Updated 6 years ago
• ohjeongwook / CanBusHacker
  ☆29Updated 4 years ago
• HackingThings / CAN-Bus-Arduino-Tool
  A tool for performing replay and sniffing CAN bus traffic.
  ☆40Updated 4 years ago
• zombieCraig / CarHackerBookCode
  A small repository of code and snippets for the Car Hacker's Manual
  ☆85Updated 10 years ago
• Gutenshit / CANBadger-Server
  The CanBadgers best friend! Control multiple CanBadgers over Ethernet.
  ☆19Updated 4 years ago
• zjlywjh001 / CAN_OMEGA
  Ultimate CAN Bus tool for Car hacking. Full Featured hardware & software.
  ☆44Updated 8 years ago
• collin80 / A0RET
  CANBus reverse engineering firmware for the Macchina A0
  ☆18Updated 4 months ago
• manux81 / canspy
  Very simple tool for users who need to interface with a device based on CAN (CAN/CANopen/J1939/NMEA2000/DeviceNet) such as motors, sensor…
  ☆55Updated 8 years ago
• nihilus / IDAProBoschME7
  Siemens Bosch ME7.x Disassembler Helper for IDA Pro
  ☆15Updated 9 years ago
• medo64 / Cananka
  CAN bus interface
  ☆13Updated 5 months ago
• atlas0fd00m / rfcat-firsttry
  swiss army knife of ISM RF!
  ☆24Updated 7 years ago
• fulcrum7 / SCANFISH
  Software for Controller Area Network (CAN) monitoring and debugging
  ☆17Updated 13 years ago
• synman / AdaptiveTuner
  Adaptronic Select ECU Tuning Aid
  ☆26Updated 10 years ago
• linklayer / cantact-book
  Documentation for the CANtact devices
  ☆31Updated 3 years ago
• aueb / automotivesec
  ☆26Updated 2 years ago
• jakka351 / Barra-in-a-Beamer
  Barra in a 7 Series BMW
  ☆13Updated last month
• mwkpe / cantools
  A collection of CLI tools for the CAN bus network
  ☆22Updated 3 years ago
• fville / CANAnalyzer
  CAN bus analyzer written in python+wxPython. Works with Lawicel CANUSB device.
  ☆10Updated 11 years ago
• openxc / openlpc-USB_Bootloader
  LPC1759 USB bootloader based on a Mass Storage Device
  ☆12Updated 8 years ago
• samyk / nRF24LE1_Programmer
  Arduino sketches and Perl script to program flash on Nordic nRF24LE1 wireless SOC
  ☆19Updated 10 years ago