vogelchr / radioclkd2
Quick and dirty fork of http://www.jonatkins.com/page/software/radioclkd2 adding Linux GPIO pin support.
☆19Updated 3 years ago
Alternatives and similar repositories for radioclkd2
Users that are interested in radioclkd2 are comparing it to the libraries listed below
Sorting:
- Shared memory NTP reference clock for Everset es100 WWVB receiver☆21Updated 4 years ago
- NCT5104D GPIO Linux Driver☆13Updated last year
- Automatic Information System decoder for shipborne position reporting for the Gnuradio project☆24Updated 9 years ago
- ☆67Updated 2 years ago
- Firmware and programmer to re-flash the UV3R radio☆93Updated 11 years ago
- fork of http://thre.at/kalibrate/ for use with rtl-sdr devices☆37Updated 5 years ago
- A digital mode soundcard interface for the Raspberry Pi☆50Updated 5 years ago
- Modified version of fldigi - a soundcard decoding program☆31Updated 8 years ago
- General purpose firmware for MicroModem with forward error correction and larger packet sizes☆62Updated 6 years ago
- ☆10Updated 2 years ago
- AX25 Modem on AVR Devices☆78Updated 12 years ago
- Mobilinkd TNC1 Firmware☆53Updated 7 years ago
- RF 2 APRS-IS Gateway☆89Updated last month
- Arduino library to transmit WWVB and JJY with a 40kHz or 60kHz carrier☆40Updated 4 years ago
- A ExtIO DLL for the rtl_tcp SDR network server☆22Updated 9 years ago
- Yet another DCF77 decoder. This one is intended for the Raspberry Pi platform but might work on other devices using GPIO pins too.☆19Updated last year
- An obsolete AFSK1200 decoder that uses the soundcard as input device.☆46Updated 7 years ago
- rtl-sdr spectrum analyzer☆65Updated 6 months ago
- Frontend Filter and LNA Design for the reception of Aircraft ADS-B signals. CC-BY-SA☆71Updated 11 years ago
- $14 Ham Radio Internet Remote Rig Control☆43Updated last year
- GPS control and configuration for U-Blox GPS on Raspberry Pi 3B...☆50Updated last year
- Reciever software for FM modulated temperature stations.☆18Updated 2 years ago
- Hardware design files for the Si5351A Breakout Board☆23Updated 4 years ago
- Configure Netgear ProSafe Plus Switches on linux☆137Updated last year
- pocsag library for arduino + demo application for si4332 RF modules☆80Updated 11 years ago
- A tool for reading, displaying and saving data from the NanoVNA☆26Updated 2 months ago
- A command-line tool to control 433MHz OOK based devices☆41Updated 6 years ago
- Receives voice packets via UDP and allows to play them back using aplay.☆9Updated 4 years ago
- WSPR beacon based on Arduino + si5351☆30Updated 2 months ago
- ☆45Updated 10 years ago