silentbicycle / spookyLinks
C library for OOK Manchester encoding, decoding, and dynamic clock recovery
☆34Updated 11 years ago
Alternatives and similar repositories for spooky
Users that are interested in spooky are comparing it to the libraries listed below
Sorting:
- Example projects for the 1BitSy development boards.☆38Updated last year
- AVR based ISM transciever covering 260-960MHz☆19Updated 13 years ago
- A prototyping board for various RF components☆13Updated 6 months ago
- Open source code base for ARM Cortex M3 LPC1347 or Cortex M0 LPC11U37/LPC11U24 MCUs☆55Updated 9 years ago
- USB bootloader for the CC1111 RF SoC☆27Updated 6 years ago
- A size optimized bootloader and software library for the AVR ATtiny☆17Updated 9 years ago
- Simple examples and utilities for the STM32 "Blue Pill"☆59Updated 7 years ago
- ☆18Updated 5 years ago
- Reed-Solomon Codec☆11Updated 6 years ago
- USB reverse engineering utils (capture / replay / e.t.c.)☆51Updated 2 years ago
- ☆12Updated 8 years ago
- Troubleshooting tool for embedded devices available from SparkFun Electronics☆74Updated 6 years ago
- SC16IS750 Breakout, available from SparkFun Electronics☆13Updated 10 years ago
- Eagle scripts for LED matrix display generation☆14Updated 2 years ago
- An open source cross-platform UF2 bootloader based on the TinyUSB library☆27Updated 4 years ago
- Soundcard RFID decoder for 125KHZ HID cards.☆27Updated 9 years ago
- An implementation of the SWD protocol using the Bus Pirate☆89Updated 7 years ago
- Part Style Guide for part footprints.☆9Updated 8 years ago
- ☆15Updated 7 years ago
- My KiCAD libraries☆18Updated 3 weeks ago
- U-Boot for Cortex-M3 and Cortex-M4☆9Updated 11 years ago
- USB Full-Speed (12Mbps) protocol analyzer for the DSO Quad☆21Updated 12 years ago
- FX2 EZ USB eeprom reader/writer for libusb☆29Updated 2 years ago
- This is the base code using by the Mojo V3 to load the FPGA and act as a USB to serial port/ADC for the FPGA. This code is intended to be…☆35Updated 6 years ago
- ☆28Updated 9 years ago
- C++ TCP/IP and SSH stack with bounded run time and no dynamic memory allocations☆40Updated last month
- This is a reference pcb and schematics for a custom Teensy 3.1 board in EAGLE CAD format. More info on this can be found in our blog post…☆42Updated 9 years ago
- Code, mechanical designs, and electronic plans related to the OpenSpectrometer project.☆26Updated 10 years ago
- A teensy 3.1-based bare-metal super simple oscilloscope/experimentation platform☆56Updated 7 years ago
- Various projects aiming at unlocking and programming the MINI54ZAN microcontroller☆18Updated 4 years ago